National Gypsum Construction Guide

09 29 00/NGC
BUYLINE 1100
Description Core Thickness/Type Width/Edge Lengths
Gold Bond BRAND XP Fire-Shield
Wallboard is manufactured
with a fire resistive type X gypsum
core and is designed to
provide extra protection
against mold and mildew.
Refer to page 68.
Gold Bond BRAND XP Fire-Shield
C Wallboard has a specially
formulated type X gypsum
core to achieve superior fire
resistance performance and is
designed to provide extra protection
against mold and
mildew. Refer to page 68.
Type X 5/8" (15.9 mm) FSW-3 4' (1219 mm) 8' (2438 mm)
Square
thru
or 12' (3657 mm)
Tapered
Type X 1/2" (12.7 mm) FSMR-C 4' (1219 mm) 8' (2438 mm)
Square
thru
or 12’ (3657 mm)
Tapered
STA-SMOOTH ® BRAND WALLBOARD
STA-SMOOTH ® BRAND WALLBOARD
STA-SMOOTH ® BRAND WALLBOARD
STA-SMOOTH ® BRAND WALLBOARD
STA-SMOOTH ® BRAND WALLBOARD
STA-SMOOTH ® BRAND WALLBOARD
STA-SMOOTH ® BRAND WALLBOARD
STA-SMOOTH ® BRAND WALLBOARD
1/ 2
1/ 2"
1/ 2" x
1/ 2" x
1/ 2" x 1
1/ 2" x 12
1/ 2" x 12
1/ 2" x 12'
Sta-Smooth BRAND Gypsum
Wallboard, used with Sta-
Smooth Joint Compound, forms
a drywall system offering
maximum joint strength. Two
edge configurations provide
relief on joint deformities. The
round edge configuration solves
joint deformity problems caused
by twisted framing, damaged
wallboard edges, poor alignment
and extremes in humidity and
temperature. Refer to page 65.
Regular 1/2" (12.7 mm) 4' (1219 mm) 6' (1828 mm)
Sta-Smooth thru
16'(4876 mm)
Type X 1/2" (12.7 mm) FSW-C 4' (1219 mm) 6' (1828 mm)
Sta-Smooth thru
5/8" (15.9 mm) FSW 16' (4876 mm)
Type X 5/8" (15.9 mm) FSW-C 4’ (1219 mm) 8' (2438 mm)
Sta-Smooth thru
14' (4267 mm)
Note: 1/2" regular Sta-Smooth wallboard available
in 54" widths.
GOLD BOND ® BRAND MR BOARD
GOLD BOND ® BRAND MR BOARD
GOLD BOND ® BRAND MR BOARD
GOLD BOND ® BRAND MR BOARD
GOLD BOND ® BRAND MR BOARD
GOLD BOND ® BRAND MR BOARD
GOLD BOND ® BRAND MR BOARD
GOLD BOND ® BRAND MR BOARD
1/ 2"
1/ 2" x
1/ 2" x
1/ 2" x 8
1/ 2" x 8'
1/ 2" x 8' T
1/ 2" x 8' T
1/ 2" x 8' TE
Gold Bond BRAND MR Board
(Moisture Resistant)
is a specially processed
gypsum wallboard for use as
a base for ceramic tile and
other non-absorbent finish
materials in dry areas and
areas with limited water
exposure. Facing paper is
colored light green. Refer
to page 69.
Regular 1/2" (12.7 mm) 4' (1219 mm) 6' (1828 mm)
Tapered
thru
16' (4876 mm)
Type X 1/2" (12.7 mm) FSMR-C 4' (1219 mm) 6' (1828 mm)
5/8" (15.9 mm) FSW-3 Tapered thru
16' (4876 mm)
09 29 00
KAL-KORE ® BRAND PLASTER BASE
KAL-KORE ® BRAND PLASTER BASE
KAL-KORE ® BRAND PLASTER BASE
KAL-KORE ® BRAND PLASTER BASE
KAL-KORE ® BRAND PLASTER BASE
KAL-KORE ® BRAND PLASTER BASE
KAL-KORE ® BRAND PLASTER BASE
KAL-KORE ® BRAND PLASTER BASE
1/ 2"
1/ 2" x
1/ 2" x
1/ 2" x 8
1/ 2" x 8
1/ 2" x 8' T
1/ 2" x 8' T
1/ 2" x 8' TE
Kal-Kore BRAND Plaster Base
is a tapered edge gypsum
wallboard plastering base
having a blue absorptive face
paper surface designed to
permit rapid trowel
application and strong bond
of veneer or conventional
gypsum plaster. Refer to
page 43.
Regular 3/8" (9.5 mm) 4' (1219 mm) 8' (2438 mm)
1/2" (12.7 mm) Square thru
or 16' (4876 mm)
Tapered
Type X 1/2" (12.7 mm) FSK-C 4' (1219 mm) 8' (2438 mm)
5/8" (15.9 mm) FSK Square thru
or 16' (4876 mm)
Tapered
Note: 1/2" regular Kal-Kore plaster base available
in 54" widths.
NATIONAL GYPSUM WALLBOARD PRODUCTS
57