National Gypsum Construction Guide
National Gypsum Construction Guide The entire - AECinfo.com
National Gypsum Construction Guide The entire - AECinfo.com
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
09 29 00/NGC<br />
BUYLINE 1100<br />
Description Core Thickness/Type Width/Edge Lengths<br />
HIGH FLEX ® BRAND WALLBOARD<br />
HIGH FLEX ® BRAND WALLBOARD<br />
HIGH FLEX ® BRAND WALLBOARD<br />
HIGH FLEX ® BRAND WALLBOARD<br />
HIGH FLEX ® BRAND WALLBOARD<br />
HIGH FLEX ® BRAND WALLBOARD<br />
HIGH FLEX ® BRAND WALLBOARD<br />
HIGH FLEX ® BRAND WALLBOARD<br />
1/ 4<br />
1/ 4"<br />
1/ 4" x<br />
1/ 4" x 8<br />
1/ 4" x 8<br />
1/ 4" x 8'<br />
1/ 4" x 8' E<br />
1/ 4" x 8' EE<br />
High Flex BRAND Wallboard is<br />
specifically designed for<br />
radius construction such as<br />
curved walls, archways and<br />
stairways. It can be used for<br />
both concave and convex<br />
surfaces. 1/4" High Flex is<br />
typically applied in double<br />
layers. Refer to page 74.<br />
Regular 1/4" (6.3 mm) 4' (1219 mm) 8' (2438 mm)<br />
Eased<br />
thru<br />
10' (3048 mm)<br />
HIGH STRENGTH BRAND CEILING BOARD<br />
HIGH STRENGTH BRAND CEILING BOARD<br />
HIGH STRENGTH BRAND CEILING BOARD<br />
HIGH STRENGTH BRAND CEILING BOARD<br />
HIGH STRENGTH BRAND CEILING BOARD<br />
HIGH STRENGTH BRAND CEILING BOARD<br />
HIGH STRENGTH BRAND CEILING BOARD<br />
HIGH STRENGTH BRAND CEILING BOARD<br />
1/ 2<br />
1/ 2"<br />
1/ 2" x<br />
1/ 2" x 1<br />
1/ 2" x 12<br />
1/ 2" x 12<br />
1/ 2" x 12'<br />
1/ 2" x 12' T<br />
High Strength BRAND Ceiling<br />
Board is designed to resist<br />
sagging equal to 5/8" gypsum<br />
wallboard. Installed<br />
perpendicular to framing,<br />
span can be up to 24" o.c.<br />
Can be decorated with spray<br />
textures and will support<br />
insulation. Refer to page 76.<br />
Regular 1/2" (12.7 mm) 4' (1219 mm) 6' (1828 mm)<br />
Tapered<br />
thru<br />
16' (4876 mm)<br />
Hi-Abuse BRAND XP Fire-Shield Regular 5/8" (15.9 mm) FSW<br />
Wallboard is designed for use in<br />
areas where surface durability<br />
and indentation resistance are<br />
major concerns. The product is<br />
manufactured with a fire<br />
resistive gypsum core encased<br />
in heavy smooth abrasion<br />
resistant, mold/mildew resistant<br />
purple paper on the face side<br />
and heavy mold/mildew<br />
resistant liner paper on the back<br />
side. Refer to page 77.<br />
4' (1219 mm) 8' (2438 mm)<br />
Square<br />
thru<br />
or 12' (3657 mm)<br />
Tapered<br />
09 29 00<br />
Hi-Impact BRAND XP Fire-Shield<br />
Wallboard is designed for use<br />
in areas where<br />
impact/penetration resistance<br />
is a major concern. The<br />
product is manufactured with a<br />
fire resistive, moisture resistant<br />
gypsum core encased in heavy<br />
smooth abrasion resistant,<br />
moisture, mold/mildew<br />
resistant purple paper on the<br />
face side and heavy<br />
mold/mildew resistant liner<br />
paper on the back side. A<br />
fiberglass mesh is embedded in<br />
the board to provide additional<br />
impact/penetration resistance.<br />
Refer to page 80.<br />
Type X 5/8" (15.9 mm) FSW-5 4' (1219 mm) 8' (2438 mm)<br />
Square<br />
thru<br />
or 12' (3657 mm)<br />
Tapered<br />
NATIONAL GYPSUM WALLBOARD PRODUCTS<br />
59