AHG Solutions Guide_Edition 2.7

XRE - Conventional Boilers
Contents
CONDENSING &
CONVENTIONAL BOILERS
XRE
Cast Iron Sectional Boilers
150 – 1450kW
Note: control panel shown for illustrative purposes only and may not be used on actual boiler.
XRE Cast Iron Sectional Boilers, being of modular construction, are ideal
for retrofitting into plant rooms with limited access as they are supplied
unassembled and can fit through a standard doorway. They are able to
be fitted with either oil, gas or Low NOx burners.
The XRE provides high energy output whilst offering
significant energy savings and reduced environmental
impact. It is ideally suited to underfloor heating
applications.
Exchange surface are arranged in parallel streams for
higher performance and the crossed girder construction
ensures excellent distribution of mechanical forces.
The large heat exchange surface in the combustion
chamber allows better and more efficient exchanger/
burner combinations. XRE boilers display high combustion
efficiency of up to 83% depending on configuration.
Increased insulation results in a remarkable reduction
in heat losses and energy consumption. Double layers of
100mm glass wool let the boiler operate efficiently and
quietly for your peace of mind.
The XRE has been designed for ease of installation and
problem free maintenance. Hinged door and reversible door
hatch provide easy access. For low temperature operation
modulated down to 40°C.
Product Quick Check
Type
Range
Cast Iron Sectional
105-335kW (XRE3)
390-780kW (XRE4)
695-1450kW (XRE5)
Efficiency Gross 83%
Fuel Type
Natural Gas, LPG,
Dual Fuel (Natural Gas/LPG)
Gas Approval Type Type B approved to AS3814
Outdoor option Yes
Modulation up to 1:10
Cascadeable Yes
Max Pressure 600 kPa
120