AHG Solutions Guide_Edition 2.7
Full Product and Solutions Guide - Automatic Heating Global Pty Ltd
Full Product and Solutions Guide - Automatic Heating Global Pty Ltd
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Stainless Steel Flue Systems - Flue Systems<br />
Contents<br />
CONDENSING &<br />
CONVENTIONAL BOILERS<br />
Firex Flue<br />
Typical Flue Installation<br />
1<br />
2<br />
Part Numbers<br />
Item Part Code Part Description<br />
1<br />
2<br />
3<br />
4<br />
5<br />
PDAR62200<br />
PDFMR1425<br />
PDED01200<br />
PDED02200<br />
PDFB19200<br />
Anti-wind Cap Ø 200mm<br />
Adjustable Wallband<br />
M/F Straight Element<br />
L.1000mm Ø 200mm<br />
M/F Straight Element<br />
L.500mm Ø 200mm<br />
Locking Band Ø 200mm<br />
3<br />
6<br />
7<br />
8<br />
PSACGTAT<br />
PDED03200<br />
PDTD08200/150<br />
SS Flue Fibreglass Tape Gasket 10m<br />
adhesive Roll (up to 550ºC)<br />
M/F Straight Element<br />
L.330mm Ø 200mm<br />
90° Tee with Single-wall Outlet Ø 150mm<br />
9<br />
PSRC09D150<br />
F/F Sleeve<br />
10<br />
KWZ150<br />
SS Flue Draft Regulators Ø 150mm<br />
11<br />
PDRB82200<br />
135° Tee Ø 200mm<br />
12<br />
PDCQ45200<br />
M/F 45° Elbow Ø 200mm<br />
4<br />
5<br />
6<br />
13<br />
14<br />
15<br />
PDRT01150200<br />
PDRC09150<br />
PDRC09200<br />
PDMI42200<br />
Flue enlarger 150mm to 200mm<br />
*This part is required for boilers with 150mm outlets<br />
e.g. Firex 34<br />
F/F Boiler Adapter Ø 150mm (for Firex 34)<br />
F/F Boiler Adapter Ø 200mm (for Firex 45<br />
and above)<br />
M/F Inspection Element Ø 200mm<br />
7<br />
16<br />
PDTC80200<br />
Blind Cap with Side Condensation Drain<br />
Ø 200mm<br />
WARNING<br />
8<br />
• The appliance and flue-system must be installed<br />
in accordance with AS/NZS 2918 and the relevant<br />
building code or codes.<br />
9<br />
10<br />
• Any modification of the appliance that has not been<br />
approved in writing by the testing authority will be in<br />
breach of the approval granted for compliance with<br />
AS/NZS 4013.<br />
11<br />
• A triple skin flue is required within the ceiling space.<br />
To comply with this requirement, we recommend that<br />
the section of double wall flue passing through the<br />
ceiling space be encased within 300mm diameter<br />
single wall flue.<br />
• Once the flue has been installed and approved by a<br />
professional installer, the flue must not be modified<br />
in any way.<br />
15<br />
12 14<br />
13<br />
*This part is<br />
only required<br />
for boilers with<br />
150mm outlets<br />
e.g. Firex 34<br />
16<br />
Ensure condensate drain<br />
contains water trap to<br />
prevent fumes escaping<br />
from the flue<br />
146
Change language