AHG Solutions Guide_Edition 2.7

Dirt Separators - Dirt and Air Separation
Contents
EcoTrap (Brass)
Dirt and Sludge Separator
The core element is a tube mesh construction that has
proven itself over the decades, with an extremely low rate
of pressure loss in the fl ow direction and a high rate of
pressure loss in the transverse direction. This drastically
reduces the amount of turbulence and guides the sludge
particles to a part-stabilized area.
Features
• Volumetric flow - 1.25 - 8 m 3 /h
• Thermal EPP foam insulation - DN 20 - DN 40 and 2”
EXPANSION &
DEAERATION
Several connections are available from
A22 to 2”
Through flow is not impeded by sludge
Space-saving, perpendicular draining
tap. The collected sludge is quickly and
forcefully pressed out when the tap is
opened so that it can be closed again
right away. The entire process takes
just a few seconds
Boiler
Duraflex
EcoTrap
Magnetic insert
Suitable for-M models
The capacity to capture large amounts
of sludge results in longer intervals
before cleaning becomes necessary
EcoTrap (Brass) System Dirt and Sludge Separation Sketch
Brass, 110°C 10 bar - Horizontal
Type Weight kg Connection V max m 3 /h L mm Ø mm H mm
D 3/4 0.9 G 3/4 1.25 85 63 103 2)
D 1 1 G 1 2 88 63 120 2)
D 1 1/4 1.2 G 1 1/4 3.7 88 63 140 2)
D 1 1/2 1.3 G 1 1/2 5 88 63 174 2)
D 2 3.1 G 2 8 132 100 215
with Magnetic Insert
H
L
D 3/4 M 1 G 3/4 1.25 85 63 103 2)
D 1 M 1.1 G 1 2 88 63 120 2)
D 1 1/4 M 1.3 G 1 1/4 3.7 88 63 140 2)
D 1 1/2 M 1.4 G 1 1/2 5 88 63 174 2)
D 2 M 3.3 G 2 8 132 100 215
Ø
Brass, 110°C 10 bar - Vertical
Type Weight kg Connection V max m 3 /h L mm Ø mm H mm
D 3/4 V 1.4 G 3/4 1.25 84 63 144 2
D 1 V 1.5 G 1 1.25 84 63 144 2
with Magnetic Insert
D 3/4 V - M 1.4 G 3/4 1.25 84 63 144 2
D 1 V - M 1.5 G 1 1.25 84 63 144 2
H
L
2)
Thermal insulation available
Ø
198