AHG Solutions Guide_Edition 2.7

Contents
Euromax - Condensing Boilers
Features
• High efficiency condensing boiler ≤ 98% Net
• No return flow temperature limitation
• Three pass flue gas exhausts in two cylindrically arranged,
stacked boiler drums
• All parts in contact with flue gas or condensate are made from
stainless steel
• Minimum load according to the modulation range of the burner
• Large water volume for good thermal stratification
• Balanced combustion chamber geometry for rapid heat
transmission and clean and complete combustion
• Optimised 860mm boiler width for ease of installation
• Operating overpressure 600 kPa
• 100 mm heat insulation for the minimisation of radiation losses
• Boiler doors hinged right hand or left hand
Advantages
• Fully Stainless Steel - All parts of the Euromax Condensing
Boiler that come in contact with flue gas or condensate
are made from stainless steel. This feature ensures the
longevity of the boiler through resistance to corrosion from
the acidic condensate created inside the boiler.
• No return water temperature limitation - Euromax
accommodates lower return water temperatures and can
operate at a ΔT of up to 30°C.
• Suitable for Dual Fuel applications - The Euromax range
is suitable for use with natural gas, LPG or light oil burners
and has been successfully used for dual fuel (natural gas/
LPG or natural gas/light oil) applications where backup fuel
supply is required, such as hospitals.
CONDENSING &
CONVENTIONAL BOILERS
CH Flow
Burner
CH Return
Smoke Chamber
Condensate Drain
77