AHG Solutions Guide_Edition 2.7
Full Product and Solutions Guide - Automatic Heating Global Pty Ltd
Full Product and Solutions Guide - Automatic Heating Global Pty Ltd
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Contents<br />
Modulex EXT - Condensing Boilers<br />
Each heat generating module within our Modulex EXT<br />
boilers is self-contained, with its own downfiring premix<br />
gas burner, fan, ignition and safety controls. As<br />
system load decreases, a built-in Boiler Cascade Manager<br />
modulates the boiler down to the combined minimum. As<br />
loads continue to reduce, individual modules are switched<br />
off as necessary down to a minimum output of a single<br />
module – 12kW for 150-350kW models and 22kW for 440-<br />
1200kW models. This ensures optimum load matching<br />
and minimises wasteful boiler cycling, maximising energy<br />
efficiency in the process. The combination of a high<br />
modulation ratio up to 1:54 and a high output plus very low<br />
water content ensures rapid warm-up and turn-down times<br />
for Modulex EXT boilers. They are subsequently also able to<br />
respond quickly to changing demands throughout the day.<br />
Thanks to their modular design, Modulex EXT boilers will<br />
continue to operate even in the unlikely event that a single<br />
module malfunctions.<br />
CONDENSING &<br />
CONVENTIONAL BOILERS<br />
Features<br />
• Exceptional energy efficiency<br />
(up to 109% at the minimum modulated capacity)<br />
• Low noise<br />
• Ultra low emissions<br />
• Full BMS capability.<br />
Allows monitoring of performance and faults<br />
• Variable Water Flow rate - Allows the boiler to operate at a<br />
constant 20°ΔT – maintaining the boiler at the most efficient<br />
duty point.<br />
• Able to be supplied as dismantled - When needing to achieve<br />
installation in tight plant rooms or inaccessible areas, this<br />
feature can enable much better access and often saves<br />
significant costs involved in placing equipment via a crane<br />
from outside the building.<br />
Advantages<br />
• High turndown ratio of up to 1:54 - This provides significant<br />
energy savings, particularly for part load or low load<br />
requirements. It also stops boiler cycling and contributes to<br />
its very quiet operation.<br />
• Multi burner construction - If one burner requires<br />
maintenance, the other burners can continue to operate,<br />
providing built-in redundancy.<br />
• Small space saving footprint - This makes it easy to install<br />
in plant rooms where floor space is at a premium.<br />
Full BMS<br />
capability<br />
Allows monitoring<br />
of performance<br />
and faults<br />
Low nox