AHG Solutions Guide_Edition 2.7

Stainless Steel Flue Systems - Flue Systems
Contents
Flue Installation Instructions
CONDENSING &
CONVENTIONAL BOILERS
4
3
2
1
Installation Guidelines
1
2
3
4
All flue parts are to be assembled in a consistent
fume direction (as indicated by arrows)
Gaskets must be placed inside the female socket,
with the profiled face always pointing inwards
towards the centre, smooth side outwards
seated in the groove. Condensing Boilers - Black
Gaskets, Non Condensing Boilers - Red Gaskets
Using silicone spray on the male element, join
together gently ensuring gasket remains in
groove.
Fasten the locking band around the ridges of the
male and female joint, taking care to ensure that
the pointed arrow is fitted to match the direction
of flow. The locking band will only fit properly in
one direction.
142