AHG Solutions Guide_Edition 2.7

Contents
Stainless Steel Flue Systems - Flue Systems
Meridian Flue Manifold Kit (MFMK)
7
8
CONDENSING &
CONVENTIONAL BOILERS
6
11
5
9
10
4
3
2
1
Final Assembly
Installation Notes and Part Numbers
Item Notes Part Code Part Description Quantity
1
Insert the plastic flue piece (ø100mm)
into the boiler
2 Install the check valve
PABED20D100 PPH Flue Piece M/F White Straight Element L.205mm 1
PAVC01D110100 PPH Flue Non-return Valve 110F/100M with Siphon 1
3 Install the Flue reducer (ø160mm to ø110mm)
4 Install the straight flue piece (ø160mm)
5 Install the 45° flue bend
6
Connect the common flue (ø300mm) with the 45°
flue bend.
7 Refer note 2 on pg 142
8 Refer note 4 on pg 142
9 Refer note 2 on pg 142
10 Refer note 4 on pg 142
PSRT01110160 SS Flue Reducer M&F ø110mm x ø160mm 1
PSED02160 SS Flue Piece ø160mm x 500mmL 1
PSCQ45160 SS Flue Bend ø160mm 45° 1
PSTR16D300 SS Flue 90° Tee ø300mm reduced to ø160mm (Meridian Flue Manifold) 1
PSGT71300 SS Flue EPDM Gasket ø300mm (Suitable up to 120°C) 1
PSFB19300 SS Flue Locking Band ø300mm 1
PSGT71160 SS Flue EPDM Gasket ø160mm (Suitable up to 120°C) 3
PSFB19160 SS Flue Locking Band ø160mm 3
11
Connection of ø160mm flue to ø300mm flue at 45
angle is to encourage condensate to flow through
ø300mm flue to drain point rather than drain back
into boiler via the ø160mm flue
143