SAILOR TT-3084A Fleet 77 SAILOR TT-3086A Fleet 55 - Polaris-as.dk
SAILOR TT-3084A Fleet 77 SAILOR TT-3086A Fleet 55 - Polaris-as.dk
SAILOR TT-3084A Fleet 77 SAILOR TT-3086A Fleet 55 - Polaris-as.dk
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4444<br />
Chapter 4: Operation<br />
Each input or output pin can be configured <strong>as</strong> either active high or low.<br />
TxOff (Transmit Off):<br />
When this function is active the terminal will stop all transmission from the<br />
antenna by terminating the call <strong>as</strong> it is normally done. Distress alarms from<br />
ship or from land will be allowed.<br />
RS (Radio Silence):<br />
This function h<strong>as</strong> higher priority than the Transmit-Off function. If this function<br />
is active any transmission from the antenna will be blocked. Even distress calls<br />
in both directions will be prohibited.<br />
ExtRing (External Ringer):<br />
Calls to Handset #1, Handset #2, RJ11 #1, RJ11 #2 and RJ11 #3 can be routed to<br />
an external ringer connected to an I/O pin with the External Ringer function.<br />
The output signal for the external ringer is activated when an incoming call to<br />
the routed interface is received (ringing). See Routing on page 66.<br />
The above functions can only be activated by the discrete I/O pins. The pins<br />
have to be configured from the Super User menu, which can only be accessed<br />
by entering a p<strong>as</strong>sword.<br />
Super User functions 93<br />
Operation