SAILOR TT-3084A Fleet 77 SAILOR TT-3086A Fleet 55 - Polaris-as.dk

Chapter 4: Operation
available LESs in the selected Ocean region. Use
select an Ocean region and then a LES.
or and OK to
To edit the LES names in the Default LES list, select the name and press
to start editing the selected name.
To clear the name, press .
An Allowed LES list can be selected under the Service User menu. If an
Allowed LES list exists, only the LESs in this list can be selected under Default
and Preferred LES. An Allowed LES list contains all available LES operators in
the selected ocean region. The operators marked with * can be used as
Default LES operators and thus appear in the Default LES list above. If all LES
operators are allowed and can be used there are no markings.
Preferred LES
As there are many operators, you can use PreferredLES to make selections
easier. The Preferred LES list can be used to indicate in which order LES
operators should appear on the Default LES list.
Press C for each LES intended to be on the list, in the order they
should appear in the Default LES list.
A prompt for a TNID will appear in the handset display. This value is usually 0,
but in some countries with more than one terrestrial network, the TNID can
Reset LES
have another value. To accept the default TNID, press . Press
again to update the preferred LES list.
To remove a LES from the list, press
list.
and then OK
to update the
The Reset LES command resets all the LES names to default names.
86 Super User functions
OK OK