SAILOR TT-3084A Fleet 77 SAILOR TT-3086A Fleet 55 - Polaris-as.dk

Chapter 4: Operation
Support
Press OK to save the changes and press Exit to leave a menu. Please refer
to Call waiting on page 45 for general information about the Call Waiting
Notification.
The Support menu is used for enabling or disabling the Call Waiting
Notification service. A third option Dial Spec. makes it possible to control the
Support setting using the AT shell command 1 . Choose the settings by pressing
Limit Calls
and press to leave the menu.
OK Exit
The user may not want all calls to interrupt the MPDS sessions. It is possible to
enter up to five phone numbers that are allowed to interrupt the MPDS
sessions while all others will be rejected. If Limit Calls is set to Enabled only
the five phone numbers are allowed to interrupt. If Limit Calls is set to
Disabled all calls are allowed to interrupt. The third option Dial Spec. makes it
possible to control the Limit Calls setting using the AT command 2 . Please note
that the Limit Calls service is not supported by the LES at present time.
However, it will most likely be available in near future. Choose the settings by
pressing OK and press Exit
to leave the menu.
1. If Dial Spec. is chosen, support of Call Waiting Notification can be controlled
using the AT shell command +WCWNS= during the MPDS call
setup. Possible values for the AT shell command are: 0 = DISABLED, 1 =
ENABLED, 2 = AUTOMATIC.
2. If Dial Spec. is chosen the Limit Calls setting can be controlled using the AT
command +WCWNR= during the MPDS call setup. Possible values
are: 0 = DISABLED, 1 = ENABLED.
90 Super User functions