CICS Transaction Gateway V5 The WebSphere ... - IBM Redbooks

► Configure a Transaction Program definition as follows:
– TP name: CRSR
– Complete path name: C:\Program Files\IBM\IBM CICS Transaction
Gateway\bin\cclclnt.exe
– Program parameters: CRSR
– Conversation type: Mapped
– Synchronization level: Any
– Conversation Security: Not checked
– Advanced settings:
Receive_Allocate timeout: 0
Incoming allocate timeout: 0
TP instance limit: 1
Make sure none of the boxes are checked
The file was saved under the \private subdirectory with the name sc02009.acg.
Configuration booklets, which document the required configuration for all the
different CICS TG scenarios, can be found at the following Web site:
http://www-3.ibm.com/software/ts/cics/library/manuals/ctg40dl.html
2.5 APPC definitions for the CICS TG
We used the CICS TG Configuration Tool to configure the connection to the
CICS region. The Configuration Tool generates the CTG.INI file. The Client
daemon uses the CTG.INI file to establish a connection to a CICS region.
We defined the server connection to our CICS TS region as shown in Figure 2-6
on page 30.
Chapter 2. APPC connections to CICS 29