CICS Transaction Gateway V5 The WebSphere ... - IBM Redbooks

information that you got from the client side. The following screen shows the
NETSTAT output with sessions bound from CICS to our TCP62 client on IP
address 9.1.38.39. As you can see, AnyNet uses both TCP and UDP protocols.
Example 3-9 MVS NETSTAT
MVS TCP/IP NETSTAT CS V1R2 TCPIP NAME: TCPIPMVS 01:02:47
User Id Conn Local Socket Foreign Socket State
------- ---- ------------ -------------- -----
VTAMBUDI 0000A26F 9.12.6.6..397 9.1.38.39..1186 Establsh
VTAMBUDI 0000A271 9.12.6.6..397 9.1.38.39..1187 Establsh
VTAMBUDI 00001E57 0.0.0.0..397 0.0.0.0..0 Listen
VTAMBUDI 0000A270 9.12.6.6..1263 9.1.38.39..397 Establsh
VTAMBUDI 00001E56 0.0.0.0..397 *..* UDP
VTAMBUDI 00001E5D 9.12.6.6..2978 *..* UDP
Display VTAM AnyNet status
The VTAM command D NET,STATS,TYPE=VTAM shows whether VTAM AnyNet is
installed and the number of TCP major nodes defined to VTAM as shown in
Example 3-10.
Example 3-10 AnyNet part of the VTAM statistics
D NET,STATS,TYPE=VTAM
IST097I DISPLAY ACCEPTED
IST350I DISPLAY TYPE = STATS,TYPE=VTAM 225
IST1349I COMPONENT ID IS 5695-11701-120
IST1345I ID VALUE DESCRIPTION
IST1227I 130 YES = ANYNET/MVS SNA OVER TCP/IP INSTALLED
IST1227I 127 1 = TCP/IP MAJOR NODES
IST1227I 128 10 = MAXIMUM TCB VALUE FOR TCP/IP MAJOR NODES
IST1227I 129 3 = TCP/IP LU-LU SESSIONS
The VTAM command D NET,ID=APTCP01 displays the status of the TCP major
node as shown in Example 3-11. If you do not know the VTAM major node name,
you can use the command D NET,MAJNODES to list all the defined major nodes.
Example 3-11 TCP major node
D NET,ID=APTCP01
IST097I DISPLAY ACCEPTED
IST075I NAME = APTCP01, TYPE = TCP/IP MAJOR NODE 236
IST486I STATUS= ACTIV, DESIRED STATE= ACTIV
IST1342I DNSUFX = ITSO.IBM.COM
IST1692I TCB = 10 TCP PORT = 397
IST1400I DGTIMER = 40 EXTIMER = 5
IST1406I CONTIMER = 25 IATIMER = 60
IST654I I/O TRACE = OFF, BUFFER TRACE = OFF
Chapter 3. TCP62 connections to CICS 57