CICS Transaction Gateway V5 The WebSphere ... - IBM Redbooks

IST314I END
58 CICS Transaction Gateway V5
The VTAM command D NET,ID=TCP01PU,E displays the status of a TCP physical
unit (PU) in VTAM, as shown in Example 3-12. TCP01PU is the TCP PU defined
in the TCP major node name. The important information from this command is
that AnyNet TCP PU is active. If this is not active, TCP62 clients will not work.
Also note that dynamic LUs are supported, so we can use dynamic LU names in
VTAM.
Example 3-12 Status of TCP PU
D NET,ID=TCP01PU,E
IST097I DISPLAY ACCEPTED
IST075I NAME = TCP01PU, TYPE = PU_T2.1 241
IST486I STATUS= ACTIV--L--, DESIRED STATE= ACTIV
IST1043I CP NAME = ***NA***, CP NETID = USIBMSC, DYNAMIC LU = YES
IST1589I XNETALS = NO
IST081I LINE NAME = TCP01LNE, LINE GROUP = TCP01GRP, MAJNOD = APTCP01
IST654I I/O TRACE = OFF, BUFFER TRACE = OFF
IST1500I STATE TRACE = OFF
IST355I LOGICAL UNITS:
IST080I CCLI62LU ACT/S----Y
IST314I END
Display VTAM LU status
The VTAM command D NET,ID=SCSCPJA1,E displays the status of the VTAM LU
for the CICS region and any sessions bound as shown in Example 3-13.
Example 3-13 VTAM information from our CICS region SCSCPJA1
D NET,ID=SCSCPJA1,E
IST097I DISPLAY ACCEPTED
IST075I NAME = USIBMSC.SCSCPJA1, TYPE = APPL 358
IST486I STATUS= ACT/S, DESIRED STATE= ACTIV
IST1447I REGISTRATION TYPE = CDSERVR
IST977I MDLTAB=***NA*** ASLTAB=***NA***
IST861I MODETAB=MTAPPC USSTAB=***NA*** LOGTAB=***NA***
IST934I DLOGMOD=***NA*** USS LANGTAB=***NA***
IST1632I VPACING = 0
IST597I CAPABILITY-PLU ENABLED ,SLU ENABLED ,SESSION LIMIT NONE
IST231I APPL MAJOR NODE = APCPJA1
IST654I I/O TRACE = OFF, BUFFER TRACE = OFF
IST1500I STATE TRACE = OFF
IST271I JOBNAME = SCSCPJA1, STEPNAME = SCSCPJA1, DSPNAME = IST99C78
IST1050I MAXIMUM COMPRESSION LEVEL - INPUT = 0, OUTPUT = 0
IST1633I ASRCVLM = 1000000
IST1634I DATA SPACE USAGE: CURRENT = 0 MAXIMUM = 512