T-Mobile SGH-T869 Galaxy Tab 7.0 Plus User ... - Cell Phones Etc.

USB Debugging
When enabled, allows debugging when the device is attached to
a PC by a USB cable.
Note: This setting is used for development purposes.
1. From a Home screen, tap
➔ Applications ➔ Development.
(Apps) ➔ (Settings)
2. Tap USB debugging to enable or disable the setting. When
enabled, a check mark appears in the check box.
Stay Awake
When enabled, the screen does not go to sleep (lock) while
connected to a PC with a USB cable. This can be useful when
using some applications because the device disconnects a Wi-Fi
connection when the screen locks.
Note: This setting is used for development purposes.
1. From a Home screen, tap
➔ Applications ➔ Development.
(Apps) ➔ (Settings)
2. Tap Stay awake to enable or disable the setting. When
enabled, a check mark appears in the check box.
Allow Mock Locations
This setting is used by developers when developing locationbased
applications.
Note: This setting is used for development purposes.
1. From a Home screen, tap
➔ Applications ➔ Development.
(Apps) ➔ (Settings)
2. Tap Allow mock locations to enable or disable the setting.
When enabled, a check mark appears in the box.
Uninstalling Third-party Applications
Important!: You must have downloaded applications installed to use this
feature.
1. From a Home screen, tap (Apps) ➔ (Settings)
2.
➔ Applications ➔ Manage applications.
Tap the Downloaded tab and select your desired
application.
3. Tap Uninstall (from within the top area of the Application
info page).
4. At the prompt, tap OK to uninstall the application.
Settings 191