SAP Production Planning Table

MRP area entered only.
You define the MRP areas in Customizing for MRP. You can thereby assign
the following to
an MRP area: one or more storage locations (example: you want to carry
out planning for a
particular assembly line and therefore assign a production storage
location to the MRP area)
a subcontractor.
You assign the various MRP areas to the materials in the material
master. For this, you
create an MRP area segment for a material for every MRP area, in which
it is used. In this
MRP area segment, you can define MRP parameters such as, for example,
the lot size or MRP
type. This allows you to plan the material differently in the MRP area
from how you plan it
in the plant MRP area.
MRP with MRP areas for the material is not activated until the material
has been assigned
to an MRP area. If you have not assigned a material to an MRP area,
that is, you have
not created an MRP area segment in the material master, the material
will continue to
be planned in the plant MRP area only. If you have assigned an MRP area
to it, the system
can plan it in the plant MRP area and in the assigned MRP area.
PP - The Common Planning Strategy used
The planning strategies are maintained in Customizing for Demand Management in
SM30 - V_T461S.
Define the Planned Requirement Type and assign the requirement class in OMP1.
Define the requirement class in OMPO.
Check the independent requirement and consumption of requirement class in OMPC.
Maintain the message for invalid requirement type in OMPJ.
You define the strategy group in SM30 - V_T461P.
You define the Plant to MRP group in SM30 - V_T438M_S.