You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.2 Desktop Flexible Media Support System Installation (Jaguar61)<br />
Installation and Operation of Sign Cutting Plotter 2-5<br />
Figure 2-3-1<br />
Jaguar II User Manual<br />
Step 1<br />
Please examine the following items in stand carton’s accessory box:<br />
� 1 set of Roll Media Flange (2 pieces)<br />
� 1 set of Roll Holder (2 pieces)<br />
� 1 set of Roll Holder Guide Bushes (4 pieces)<br />
� 1 set of Roll Holder Support (2 pieces)<br />
� 1 set of Desktop Support Bracket (2 pieces)<br />
� 4 pieces of Plastic Foot<br />
� 4 pieces of M4 screws<br />
� 12 pieces of M6 screws<br />
� 1 piece of M4 L-shape hexagon screw driver<br />
� 1 piece of M5 L-shape hexagon screw driver<br />
� 1 piece of M6 L-shape hexagon screw driver (for adjusting the screws of Roll Holders)<br />
Step 2<br />
Roll Holder Support<br />
Put the 4 Plastic Foot under the Roll Holder<br />
Support and insert the M4 screw into the hole of<br />
Plastic Foot and tighten them with the M4<br />
L-shape screw driver. (Figure 2-3-1)<br />
M6 screws<br />
M4 screw<br />
Plastic Foot<br />
Desktop Support Brackets<br />
Roll Holder Support<br />
Step 3 Position the Desktop Support Brackets<br />
beside the Roll Holder Support and insert M6<br />
screws into the Roll Holder Support and tighten<br />
them with M5 L-shape screw driver. (Refer to<br />
Figure 2-3-2 at the left).<br />
M6 screws<br />
Figure 2-3-2<br />
M4 screws
Change language