You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5. Maintenance<br />
Jaguar II User Manual<br />
This chapter explains the basic maintenance (i.e. cleaning the cutting plotter) required for the<br />
cutting plotter. Except for the below mentioned, all other maintenance must be performed by a<br />
qualified service technician.<br />
5.1 Cleaning the Cutting Plotter<br />
In order to keep the cutting plotter under good condition and best performance, you need to<br />
clean the machine properly and regularly.<br />
Cleaning Precaution !<br />
Recommended Methods:<br />
� Unplug the cutting plotter before cleaning in<br />
order to prevent electrical shock.<br />
� Never use solvents, abrasive cleaners or strong<br />
detergents for cleaning. They may damage the<br />
surface of the cutting plotter and the moving<br />
parts.<br />
� Gently wipe the cutting plotter surface with a lint-free cloth. If necessary, clean with a<br />
damp cloth or an alcohol-immersed cloth. Wipe with water to rinse off any residue and dry<br />
with a soft, lint-free cloth.<br />
� Wipe all dust and dirt from the tool carriage rails.<br />
� Use a vacuum cleaner to empty any accumulated dirt and media residue beneath the pinch<br />
roller housing.<br />
� Clean the platen, paper sensors and pinch rollers with a damp cloth or an alcohol-immersed<br />
cloth, and dry with a soft, lint-free cloth.<br />
� Wipe dust and dirt from the stand.<br />
Basic Maintenance 5-1
Change language