CONELOG® SURGICAL PROCEDURES - Camlog

SURGERY SET CAMLOG ® /CONELOG ®
SCREW-LINE
COLOR CODING OF THE SURGICAL AND PROSTHETIC
CAMLOG ® /CONELOG ® PRODUCTS
Color Diameter
gray 3.3 mm
yellow 3.8 mm
red 4.3 mm
blue 5.0 mm
green 6.0 mm
CONELOG ® SCREW-LINE IMPLANT
SEGMENTATION OF THE SET CONTENT
IN DIFFERENT REGIONS
The drills are arranged in the set according to the treatment sequence and
are color coded/sorted by implant diameter. Color lines indicate the exact
drilling sequence. The form drills are equipped with depth stops. The form
drills cortical bone and taps with hexagon are provided for optional use by
bone qualities 1 and 2 (Lekholm & Zarb, 1985).
Separate arrangement of the depth stops for pilot and pre-drills and paralleling
pins. The holding key for insertion post is located in the covered storage
compartment.
The region of the surgical-prosthetic instruments contains the torque
wrench, tap adapters for tap, the drivers (short/long) for screw implants,
the driver for screw implants with ISO shaft for angled hand piece, the
adapter ISO shaft for angled hand piece, the drill extension ISO shaft and
the hex screwdrivers (short/long, manual/wrench and long ISO shaft).
29