CONELOG® SURGICAL PROCEDURES - Camlog
CONELOG® SURGICAL PROCEDURES - Camlog
CONELOG® SURGICAL PROCEDURES - Camlog
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
OPEN-TRAY IMPRESSION-TAKING METHOD<br />
The open-tray impression-taking method requires a custom-made impression<br />
tray that is perforated for the protrusion of the fixing screw extending<br />
from the implant axis.<br />
CONELOG ® impression posts, open tray<br />
The fixing screw is secured in the CONELOG ® impression post with an<br />
O-ring and must only be tightened by hand using the screwdriver, hex, both<br />
in the CONELOG ® implant as well as in the CONELOG ® lab analog.<br />
NOTE<br />
Before removing the impression, the loosened screw must be withdrawn<br />
until you can feel the limit stop (O-ring). Otherwise the axis divergences<br />
of the implant can make removing the impression difficult or can deform<br />
the impression due to the high compression.<br />
Impressions can be taken with implant axis divergences of up to 20°<br />
(10° for each CONELOG ® implant).<br />
The fixing screw is equipped with a predetermined breaking point. If space<br />
limitations are encountered, it can be shortened by 3.0 mm by breaking it<br />
off with a screwdriver, hex.<br />
Caution: shorten extra-orally only!<br />
3.0 mm<br />
O-ring<br />
10.0 mm<br />
CONELOG ® SCREW-LINE IMPLANT<br />
O-ring<br />
59
Change language