CONELOG® SURGICAL PROCEDURES - Camlog
CONELOG® SURGICAL PROCEDURES - Camlog
CONELOG® SURGICAL PROCEDURES - Camlog
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CONELOG ® SCREW-LINE IMPLANT<br />
CONELOG ® IMPLANT POSITION<br />
32<br />
PLANNING<br />
OVERVIEW OF DRILL SEQUENCES<br />
IMPLANT BED PREPARATION<br />
Overview:<br />
• Punch-mark the desired implant position with the<br />
Ø 2.3 mm round bur<br />
• Deep drill along the implant axial line with the<br />
Ø 2.0 mm pilot drill<br />
• Check with the Ø 1.7–2.8/2.0 mm paralleling pin<br />
with depth marks<br />
• Pre-drill with the Ø 1.7–2.8 mm pre-drill<br />
• Check with the Ø 1.7–2.8/2.0 mm paralleling pin<br />
with depth marks<br />
• Shape with the form drill<br />
• Probe the implant bed hole for its bony end<br />
• Cortical bone drilling (for bone quality 1*)<br />
• Tap SCREW-LINE (for bone quality 1 and 2*)<br />
OptIONaL fOr aLL<br />
dIamEtErs<br />
plus<br />
1.0 mm<br />
1.0 mm Promote<br />
0.4 mm<br />
We recommend using the tap for bone qualities 1* and 2*.<br />
form drills cortical bone allow implants to be inserted in the<br />
cortical bone at a lower torque for bone quality 1*.<br />
CB:Cortical Bone<br />
*Bone quality as documented in Lekholm & Zarb, 1985<br />
®<br />
Ø 3.3 mm<br />
Round bur<br />
Ø 2.3 mm<br />
Pilot drill<br />
Ø 2.0 mm<br />
16 mm<br />
13 mm<br />
11 mm<br />
9 mm<br />
rpm 800 800<br />
Ø 3.8 mm<br />
rpm U/min 800 800<br />
Ø 4.3 mm<br />
Ø 5.0 mm<br />
Round bur<br />
Ø 2.3 mm<br />
Round bur<br />
Ø 2.3 mm<br />
rpm 800 800<br />
Round bur<br />
Ø 2.3 mm<br />
Pilot drill<br />
Ø 2.0 mm<br />
16 mm<br />
13 mm<br />
11 mm<br />
9 mm<br />
7 mm<br />
Pilot drill<br />
Ø 2.0 mm<br />
16 mm<br />
13 mm<br />
11 mm<br />
9 mm<br />
7 mm<br />
Pilot drill<br />
Ø 2.0 mm<br />
16 mm<br />
13 mm<br />
11 mm<br />
9 mm<br />
7 mm<br />
rpm 800 800<br />
Depth stop<br />
Depth stop<br />
Depth stop<br />
Depth stop<br />
Paralleling pin<br />
Depth<br />
measurement<br />
Paralleling pin<br />
Depth<br />
measurement<br />
Paralleling pin<br />
Depth<br />
measurement<br />
Paralleling pin<br />
Depth<br />
measurement