CONELOG® SURGICAL PROCEDURES - Camlog

More documents

Recommendations

Info

CONELOG ® SCREW-LINE IMPLANT BITE REGISTRATION BITE REGISTRATION WITH CONELOG ® IMPRESSION POSTS, CLOSED TRAY Accurate implant-supported measuring of the arch relations and their transfer to the cast situation can be carried out with the CONELOG ® impression posts, closed tray, incl. bite registration cap. CONELOG ® IMPRESSION POST, CLOSED TRAY Art. No. C2110.3300 C2110.3800 C2110.4300 C2110.5000 CONELOG ® impression post, closed tray, incl. impression cap, bite registration cap and fixing screw for implant Ø 3.3 mm 3.8 mm 4.3 mm 5.0 mm PH mm 10.7 mm 10.7 mm 10.7 mm 10.7 mm PH: Prosthetic height SPARE BITE REGISTRATION CAP Art. No. J2112.3300 J2112.3800 J2112.4300 J2112.5000 Bite registration cap (5 units) for implant Ø 3.3 mm 3.8 mm 4.3 mm 5.0 mm 64 IMPORTANT NOTE All components for the implant-supported bite registration on CONELOG ® implants are for single use only and must not be modified. CONELOG ® impression posts, closed tray, are inserted into the implants after they have been cleaned, and the fixing screws are tightened by hand using a screwdriver, hex. Based on the color-coding, the appropriate bite registration caps are placed onto the CONELOG ® impression posts. A noticeable snap indicates that the cap is seated in its proper position.
The registration of the habitual jaw relations is taken using the standard materials. The caps must not adhere to the impression material. Remove the bite registration, bite registration caps, and CONELOG ® impression posts (by loosening the fixing screws) and give them to the dental laboratory. Screw in the CONELOG ® impression posts with the colorcoded CONELOG ® lab analogs in the cast and mount the bite registration caps in the final position. Place the bite registration on the caps. Connect the bite registration to the opposing jaw cast and mount the casts in an articulator. CONELOG ® SCREW-LINE IMPLANT 65
Page 1 and 2:
CONELOG ® SCREW-LINE IMPLANT BASIC
Page 3 and 4:
TABLE OF CONTENTS GENERAL SYSTEM IN
Page 5 and 6:
CONELOG ® SCREW-LINE IMPLANTS INTR
Page 7 and 8:
THE CONELOG ® IMPLANT SYSTEM SYSTE
Page 9 and 10:
CONELOG ® DISCONNECTOR FOR CONELOG
Page 11 and 12:
TEAM APPROACH Increasingly higher d
Page 13 and 14: ESTHETICS The use of therapeutic me
Page 15 and 16: BIOLOGICAL WIDTH After protocol-spe
Page 17 and 18: IMPLANT-SUPPORTED BRIDGES Implant-s
Page 19 and 20: PLANNING INTRODUCTION Modern implan
Page 21 and 22: LABORATORY CAST ANALySES It is esse
Page 23 and 24: WAX-UP/SET-UP The wax-up or set-up
Page 25 and 26: PLANNING WITH ORTHOPANTOMOGRAPH/ DE
Page 27 and 28: IMPLANT POSITION VERIFICATION FINAL
Page 29 and 30: SURGERY SET CAMLOG ® /CONELOG ® S
Page 31 and 32: DRILLING SPEEDS The drill speed dep
Page 33 and 34: Pre-drill Ø 1.7 - 2.8 mm 16 mm 13
Page 35 and 36: IMPLANT BED PREPARATION Shaping the
Page 37 and 38: PUNCH-MARKING THE CORTICAL BONE The
Page 39 and 40: FORM DRILLING Diameters and lengths
Page 41 and 42: FORM DRILLING After pre-drilling is
Page 43 and 44: Manual tapping is performed with ta
Page 45 and 46: IMPLANT POSITIONING Protocol-compli
Page 47 and 48: Placing the PickUp on the CONELOG
Page 49 and 50: Next, unscrew the retention screw o
Page 51 and 52: ACCESSORIES CONELOG ® ADAPTER FOR
Page 53 and 54: ACCESSORIES After unscrewing the re
Page 55 and 56: HEALING OPTIONS CONELOG ® HEALING
Page 57 and 58: IMPRESSION-TAKING INTRODUCTION CONE
Page 59 and 60: OPEN-TRAY IMPRESSION-TAKING METHOD
Page 61 and 62: CONELOG ® SCREW-LINE IMPLANT IMPRE
Page 63: NOTE After the impression post has
Page 67 and 68: FABRICATION OF A TEMPORARY SINGLE-T
Page 69 and 70: FURTHER DOCUMENTATION further infor
Page 71 and 72: CONELOG ® SCREW-LINE IMPLANT TRADE
show all

CONELOG® SURGICAL PROCEDURES - Camlog

Create successful ePaper yourself

Delete template?

Save as template?