Progress Sonic ESB Configuration and Management Guide

Chapter 11: Using Actional with Sonic Components
Enabling the ESB Interceptor
The Sonic ESB Interceptor is installed whenever a Sonic ESB container is installed on a
system. The interceptor is not, by default, enabled. In order to use the Actional Agent to
manage services and processes on a system, you must install and provision the Actional
Agent on the system where the ESB service runs, and then enable the interceptor by
making configuration changes to the ESB Container, typically through the Sonic
Management Console. Integration is set on each ESB container you want to monitor by
enabling the instrumentation in Sonic.
◆ To enable Sonic ESB instrumentation on an ESB container:
1. Start the Sonic Management Console and connect to the Directory Service that
manages the ESB service.
2. In the left panel, expand the ESB Configured Objects tree.
3. In the navigation panel, click on ESB Containers.
4. Select a container in the ESB Container Name section in the right panel.
5. In the Actional Integration section of the screen, check the Enable Instrumentation
checkbox, and, optionally, whether to allow capturing of each message's payload.
263 Progress Sonic ESB Configuration and Management Guide 8.5