Progress Sonic ESB Configuration and Management Guide

Using Activation Daemons
Adding an ESB Container to an Activation Daemon’s Activation List
The following procedure describes how to add a management container that hosts an ESB
Container an Activation Daemon’s activation list. As an example, this procedure adds the
Service5 management container which hosts an ESB Container of the same name.
◆ To add an ESB Container to an Activation Daemon’s activation list:
1. In the Sonic Management Console’s Configure tab, navigate to the Activation
Daemon you created, then right-click on it.
2. Choose Add Container to Activation List.
3. Under the General tab, specify the following properties:
Property Description
Container Name of the container to associate with the Activation Daemon.
For this example, select ... then select Containers\Service5 Container and
click OK.
Number of
Retries
Number of times the ESB ContainerActivation Daemon should attempt to
restart the spawned container. For this example, use the value 4 instead of
the default value, 0.
Retry Interval Number of seconds between attempts by the Activation Daemon to restart
the spawned container. For this example, use the value 15 instead of the
default value, 0.
For this example, your Add Container to Activation List dialog box looks like this:
Progress Sonic ESB Configuration and Management Guide 8.5 90