Thèse APPROCHE DÉTERMINISTE DU SÉCHAGE DES AVIVÉS ...

Hanhijärvi, A., Wahl, P., Räsänen, J. and Silvennoinen, R. (2003). -Observation of Development of
Microcracks on Wood Surface Caused by Drying Stresses, Holzforschung, Vol.57, pp 561-565.
Haque, M.N., Langrish, T.A.G., Keep, L.B. and Keey, R.B. (2000). -Model fitting for viscoelastic
creep of Pinus radiata during kiln drying, Wood Science and Technology, Vol.34(5), pp 447-457.
Hu, J. and Stroeven , P. (2003). -X-ray absorption study of drying cement paste and mortar,
Cement and Concrete Research, Vol.33(3), pp 397-403.
Hukka, A. (1996). -A simulation program for optimisation of medium temperature drying on an
industrial scale. 5th International IUFRO Wood Drying Conference, Quebec City, Canada.
Hunt, D.G. (1997). -Dimensional changes and creep of spruce, and consequent model requirements,
Wood Science and Technology, Vol.31, pp 3-16.
Hyoung-Woo, L., Byung-Nam, K. and Kwang-Nam, K. (2001). -Monitoring the drying
characteristics of lumber with image processing technique. 7th International IUFRO Wood Drying
Conference, Japan.
¡ ¢£¢
Irvine, G.M. (1984). -The glass transitions of lignin and hemicellulose and their measurement by
differential thermal analysis, Tappi Jounal, Vol.67(5), pp 118-121.
Jensen, S.K., Damkilde, L. and Krabbenhoft, K. (2001). -Non-destructive assessment and FEM
simulations of moisture profiles in sitka spruce(Picea Sitchensis) during drying. 3rd European
COST E15 Workshop on wood drying, Helsinki, Finland.
Joly, P. et F. More-Chevalier (1980). -Théorie, pratique & économie du Séchage des Bois,
Editions H.Vial.
Keller,R.(1994).- La constitution du bois (Ch.I). Le bois matériau d'ingénierie. Édité par
ARBOLOR. pp14-52.
Kollmann, F. (1968). -Principles of wood science and technology. Berlin, Springer-Verlag,
Germany.
Kouchadé, A.C. (2004) - Détermination en routine de la diffusivité massique dans le bois par la
Page-196-