Thèse APPROCHE DÉTERMINISTE DU SÉCHAGE DES AVIVÉS ...

méthode inverse à partir de la mesure électrique en régime transitoire. Thèse, ENGREF, Nancy.
Lehmann, E., Vontobel, P., Niemz, P. and Haller, P. (2000). -The method of neutron radiography
and its use for wood properties analysis. International Conference on Wood and Wood Fiber
Composites, Stuttgart, S. pp 313-323.
¡
Martensson, A. (1992). -Mechanical behaviour of wood exposed to humidity variations. Thesis,
Lund Institute of Technology (THL), Departement of Structural Engineering, Lund, 175 p
Martensson, A. and S. Svensson (1997 a). -Stress-Strain Relationship of Drying Wood. Part 1:
developpment of a constitutive Model, Holzforschung, Vol.51, pp 472-478.
Martensson, A. and S. Svensson (1997 b). -Stress-Strain Relationship of Drying Wood. Part 2:
Verification of a One-Dimensional Model and development of a two-Dimensional model,
Holzforschung, Vol.51, pp 565-570.
Mauget, B. (1996). -Simulation en grands déplacements du comportement mécanique du bois-
Application au séchage dissymétrique et séchage sous charge. Thèse, INPL, Mécanique et
Energétique, Nancy, 154 p.
Mauget, B. and Perré, P. (1999). -A large displacement formulation for anisotropic constitutive
laws, European Journal of Mechanics - A/Solids, Vol.18, pp 859-877.
Mauritz, R. (1995). -Trocknungsverfahren für starkes Bauholz, Holz-Zentralblatt, Vol.121(N°22),
pp.362-363.
Min Li, S.A., Luiz Oliveira, Ian D.Hartley (1997). -The Effect of Vertical Air Gaps, Air Velocities
and Fan Revolutions on the Drying Characteristics of Thick Pacific Coast Hemlock Lumber,
Holzforschung, Vol.51, pp 381-387.
Muszynski, L. and Olejniczak, P. (1996). -A Simple Experimental Method to Detrmine Some
Basic Parameters for Mechano-Sorptive Creep Model for Wood. 5 th International IUFRO Wood
Drying Conference. - Quebec city, Canada.
Page-197-