karting

MISC. ACCESSORIES
Wiring Harnesses
(Replace 1PLA with 2PLA to order anodized plates.)
Fuel Volume Displacement Blocks
Custom sizes also available
1PLA05 - 12 Bolt Oval - 4”x6”
1PLA13 - 24 Bolt Oval - 6”x10”
1PLA14 - 12 Bolt Circle - 4¾” B.C.
1PLA16 - 10 Bolt Circle - 31/8” B.C.
1PLA18 - 6 Bolt Circle - 215/16” B.C.
1PLA30 - 6 Bolt Circle - 2” B.C.
1PLA34 - 5 Bolt Circle (Sending Unit)
1PLA62 - 4 Bolt Circle - 15/8” B.C.
1PLA73 - 9 Bolt Circle - 4” B.C.
1PLA75 - 16 Bolt Circle - 6” B.C.
Gaskets
1GAS97 - 24 Bolt Oval - 6”x10”
1GAS98 - 12 Bolt Oval - 4”x6”
1GAS78 - 12 Bolt Circle - 4¾” B.C.
1GAS79 - 12 Bolt Circle - 53/8” B.C.
1GAS07 - 10 Bolt Circle - 31/8” B.C.
1GAS77 - 9 Bolt Circle - 4” B.C.
1GAS75 - 6 Bolt Circle - 215/16” B.C.
1GAS76 - 6 Bolt Circle - 2” B.C.
1GAS69 - 5 Bolt Circle (Sending Unit)
1GAS74 - 4 Bolt Circle - 15/8” B.C.
NOTE: Nylon washers available (-4)
through (-16)
DB025 - 1/8 gallon 27/8” x 27/8” x 33/8”
DB050 - 1/2 gallon 8¾” x 3½” x 3½”
Electronic Sending Unit and Gauge
DB100 - 1 gallon 8¼” x 5¼” x 5¼”
Electronic fuel level sending units are specially designed for fuel cells and bladders.
No moving parts make these units very durable. Sending units can be shortened to
fit your cell and recalibrated for accuracy. Must specify OHM range (empty to full)
when ordering. Ranges include 0-90, 10-180, 240-33, VDO 76-6, and 76-6. Add
-L to part number for fully adjustable low level light assembly.
DB200 - 2 gallon 5” x 8” x 12”
SU006 - 6” - can be shortened to 3½”
SU012 - 12” - can be shortened to 6½”
SU024 - 24” - can be shortened to 12½”
GA200 - 0-90 Ohm Gas Gauge
Low Level Sensors
For positive indication of low fuel levels.
Dip Stick
DS08 - Economy Fuel Gauge, check
your fuel level by a twist of a nut.
Specify length needed.
1ELE51 - Float Switch (350 Milliamp)
1ELE07 - 6” length probe
1ELE13 - 12” length probe
1ELE08 - 24” length probe
1ELE52 - LED 12 Volt Panel Light
396 www.cegsport.com - info@cegsport.com