Forschungs - Laser- und Medizin-Technologie GmbH
Forschungs - Laser- und Medizin-Technologie GmbH
Forschungs - Laser- und Medizin-Technologie GmbH
Sie wollen auch ein ePaper? Erhöhen Sie die Reichweite Ihrer Titel.
YUMPU macht aus Druck-PDFs automatisch weboptimierte ePaper, die Google liebt.
24<br />
Dienstleistungen<br />
Biomedizinische Optik<br />
<strong>und</strong> <strong>Medizin</strong>technik<br />
Biomedical optics and medical devices<br />
We offer a broad range of services which<br />
can be used for the development of simple<br />
sensors and highly complex medical<br />
devices. We also offer services along the<br />
whole development chain from ideas and<br />
the proof of concept, to the development,<br />
fabrication and testing of functional prototypes.<br />
Along this chain we use instruments and<br />
competences which fit the special requirements<br />
of biomedical optics. Our focus is<br />
on optics in turbid media. Here we apply<br />
inverse Monte Carlo simulations in order<br />
to obtain the intrinsic optical parameters<br />
absorption coefficient µa, scattering coefficient<br />
µs and the phase function. These<br />
data enable the calculation of the optical<br />
measurement process for a certain device<br />
by forward Monte Carlo simulation on a<br />
computer. This may also be used to optimize<br />
the measurement principle without<br />
building a device, thus saving time and<br />
money for our customers.<br />
We cover the whole process of making<br />
functional prototypes from the optical design<br />
to mechanical and electronic development,<br />
software and assembly of demonstrators<br />
so that they are available for<br />
testing in a short time. During this process<br />
we take into account the criteria of the<br />
German regulations for medical devices,<br />
with which we are very familiar.<br />
For development of commercial products<br />
in the industry, optical or tissue phantoms<br />
are becoming more and more important<br />
as a measure for quality control or calibration.<br />
They can be used during the development,<br />
at the manufacturing site and by<br />
the service technician.<br />
Wir bieten eine sehr breite Palette an<br />
Dienstleistungen für die Biomedizinische<br />
Optik <strong>und</strong> <strong>Medizin</strong>technik an. Diese kann<br />
genutzt werden, um einfache Sensoren<br />
aber auch hochkomplexe diagnostische<br />
oder therapeutische Geräte zu entwickeln.<br />
Hierbei reicht unser Angebot von der Konzepterstellung<br />
über Machbarkeitsstudien<br />
bis hin zur Entwicklung, zum Bau <strong>und</strong> der<br />
Erprobung von Funktionsmustern.<br />
Auf dem Weg dorthin können wir auf Geräte<br />
<strong>und</strong> Fähigkeiten zurückgreifen, die für<br />
die Aufgabenstellungen in der Biomedizinischen<br />
Optik speziell zugeschnitten sind.<br />
Dies umfasst z.B. Geräte für die Spektroskopie<br />
<strong>und</strong> die Bildgebung. Der Fokus ist<br />
dabei auf die Anwendung in streuenden<br />
Geweben gerichtet, die spezielle Fähigkeiten<br />
wie z.B. die inverse Monte-Carlo-<br />
Simulation erfordern. Dies versetzt uns in<br />
die Lage von Geweben die intrinsischen<br />
optischen Eigenschaften wie Absorptionskoeffizient,<br />
Streukoeffizient <strong>und</strong> Phasenfunktion<br />
in einem weiten Spektralbereich<br />
zu ermitteln.