Sentinel Hardware Keys Developer's Guide - Customer Connection ...

Chapter 8 – License Grouping
Contents Glossary Index Troubleshooting
Locking/Unlocking Groups
You can lock a group in the License Manager screen to disable its editing.
Locking Group
1. Load the group to be locked.
196 Sentinel Hardware Keys Developer’s Guide
2. In License Manager, click the Lock the License Group icon ( ). The
Lock\Unlock Group dialog box appears.
3. In the Password field, enter the password. These are case-sensitive
and can contain 4 to 32 ASCII characters.
4. In the Confirm Password field, enter the same password for confirmation.
5. Click OK.
Note: Do not forget the password to unlock the group! If you forget your password,
there is no “backdoor” that is available to give you access to your
group. Thus, it is VERY important that you remember the password you use
to lock your group.
Unlocking a Group
You will need to unlock the group in order to load it.
For an Unloaded Group
1. Click the Load button on the Group Management dialog box. A
small dialog box appears prompting you to provide the password.
2. Specify the password.
3. Click OK.