Strata DK 16 Manual
Strata DK 16 Manual
Strata DK 16 Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
INSTALLATION-CONFIGURATION<br />
SECTION 100-8<strong>16</strong>-203<br />
MARCH 1993<br />
NOTE:<br />
A maximum of two QCDU PCBs may be<br />
installed in the STRATA <strong>DK</strong>8.<br />
3.22 The STRATA <strong>DK</strong><strong>16</strong> Base Key Service Unit<br />
and the P<strong>DK</strong>U PCB each provide eight digital<br />
telephone circuits. The KCDU PCB provides four.<br />
NOTE:<br />
A maximum of two KCDU PCBs may be<br />
installed in the STRATA <strong>DK</strong><strong>16</strong>. If a KCDU is<br />
installed, no other type of station PC9 can be<br />
installed in the STRATA <strong>DK</strong><strong>16</strong>.<br />
3.23 The following devices can be connected to<br />
digital telephone circuits:<br />
l Digital Telephones (2000- and 1 OOO-series):<br />
Each digital telephone requires one circuit, and<br />
each digital telephone circuit can support a<br />
digital telephone.<br />
l Stand-alone Data Interface Units (PDIU-DS):<br />
Each PDIU-DS requires one circuit. Any digital<br />
telephone circuit, except for Circuit 8 on a P<strong>DK</strong>UI<br />
(STRATA <strong>DK</strong><strong>16</strong>), can support a PDIU-DS (see<br />
Note 1).<br />
NOTES:<br />
1. There are two versions of the P<strong>DK</strong>U:<br />
P<strong>DK</strong>Ul and P<strong>DK</strong>U2. The versions are<br />
identical, except that Circuits 1 - 8 on the<br />
P<strong>DK</strong>U2 can each support PDIU-DSs/<br />
PDIU-DI, while only Circuits 1 - 7 on a<br />
P<strong>DK</strong>Ul can support PDIU-DSs or PDIU-<br />
Dls. Also, PDIU 1 does not support 2000series<br />
digital telephone<br />
tones.<br />
continuous DTMF<br />
2. The lntegra ted Da ta Interface Unit (PDIU-<br />
DVPDIU-D12) and the Add-on Module<br />
(ADM) do not require a dedicated circuit.<br />
They share a circuit with the telephone.<br />
3. Only one option (PDIU-D12 or ADM) can<br />
be installed<br />
phone.<br />
on a 2000series digital tele-<br />
l Digital Direct Station Selection Console<br />
(DDSS): (available with STRATA <strong>DK</strong><strong>16</strong> only)<br />
Each DDSS Console requires one circuit. DDSS<br />
Consoles can connect only to Circuit 8 in the<br />
Base Key Service Unit and Circuit 8 on a P<strong>DK</strong>U.<br />
3-8<br />
The KCDU cannot support a DDSS console.<br />
l Digital Door Phone/Lock Control Box<br />
(DDCB): Each DDCB requires one circuit.<br />
DDCBs can only connect to Circuits 3 and 4<br />
(Ports 02 and 03) in the STRATA <strong>DK</strong>8 Key<br />
Service Unit or Circuit 5 (PortO4) in the STRATA<br />
<strong>DK</strong><strong>16</strong> Base Key Service Unit, and Circuit 1 (Port<br />
12) on either the P<strong>DK</strong>U or KCDU (STRATA<br />
<strong>DK</strong><strong>16</strong>).<br />
3.30 Electronic Telephone Circuit Connec-<br />
tions (STRATA <strong>DK</strong><strong>16</strong> Only)<br />
3.31 There are no electronic telephone circuits in<br />
the Base Key Service Unit, and none can be<br />
added to it. However, eitherthe PEKU PCB, which<br />
has eight electronic telephone circuits, or the<br />
PESU, which has four electronic telephone cir-<br />
cuits, can be installed in the Expansion Key Ser-<br />
vice Unit. The following devices can be connected<br />
to electronic telephone circuits.<br />
Electronic Telephones (6500-, 6000-, 3000-,<br />
2000~series): An electronic telephone can be<br />
connected to any electronic telephone circuit.<br />
One electronic telephone circuit is required per<br />
electronic telephone.<br />
Electronic Direct Station Selection Console<br />
(HDSS): The system will support only one HDSS<br />
console. The console must be connected to<br />
both Circuits 7 and 8 on the PEKU. The PESU<br />
will not support an HDSS Console.<br />
Alternate Background Music Source: The<br />
system will support an alternate Background<br />
Music source which can be heard over digital<br />
and electronic telephone speakers and external<br />
page speakers. This source can be connected<br />
to either Circuit 3 on a PEKU, Circuit 8 on a<br />
PESU, or Circuit 4 on a KSTU or PSTU PCB.<br />
Conference Amplifier: An amplifier for two CO<br />
line conferencing can be connected to Circuits<br />
6 and 7 (Ports 17 and 18) on a PEKU or PESU.<br />
3.40 Standard Telephone Circuit Options<br />
3.41 In addition to supporting standard telephones,<br />
each of the standard telephone circuits can sup-<br />
port any one of a number of single-wire-pair de-<br />
vices, including voice mail/Auto Attendant devices<br />
and modems. The QSTU, which can be installed<br />
in the STRATA <strong>DK</strong>8 Key Service Unit, has two