Strata DK 16 Manual

l-
PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
PROGRAM 60
SMDR OUTPUT/ACCOUNT CODE DIGIT LENGTH
SELECT = 2 - 6 (Item) -7
Make a selection to indicate For “2” SMDR Threshold Time = 0 or 1
which item is being assigned. For “3” SMDR COR = 0 or 1 (Data)
Select
Time.
Select
2 for
3 for
SMDR
SMDR
Threshold
output, etc.
For “4” ACCOUNT = 04 - 15
For “5” TOLL DIAL, 0 - 5
For “6” DATA = DISA security code; 1 - 15 digits
For “7” CREDIT = Credit Card Digits; 1 - 30 digits
Item Description Data
2
3
4
5
6
SMDR Threshold Time 12
0 = 1 .O seconds 1 = 10 seconds
SMDR Output when a call is completed.
0 = Outgoing Only 1 = Incoming and Outgoing
lo Forced/Voluntary Account Code Digit
Length 04 - 15.
(Digits are verified per Prog. 30, LED 14, and
Prog. 69. See Note 4)
Printout options
I
= 0 1
Toll Dial =I 0 1 All Calls7
= 0 2
= 0 3
= 0 4
= 0 5
Dial “0” calls only
Dial “1” calls only
Dial “00” calls only
Dial “l”, “O”, calls only
Dial “1” or “00” calls only
DISA Security Code9 (may be changed
from station, per Program 30)
I I Credit card call digit length, 01 - 30 digits,
7
(see Program 43)
TIME
q
(SMDR COR)
0
(ACCOUNT)
(TOLL DIAL DATA)
q
I DATA
NOTES:
1. For more 1 information, see the k-rstructions preceding the record sheets.
2. For Selection 3, initialized data assigns SMDR output to be enabled for incoming calls that are answered.
3. For selection 4, initialized data assigns a 6-digit length to all Forced/Voluntary Account Codes.
4. If PBX code is dialed, numbers dialed after the code will be checked.
5. If AK, O/C or SPCC code begins with “O”, “I “, or “OO”, that call will print out.
6. When accessing LCR feature, all digits sent to CO will be output.
7. Programming 60-3-O (printout outgoing calls only) is still available.
8. Button/LED 1 = blank, Button/LED 2 = don’t care.
9. If a security code is not programmed, outgoing CO line access via DISA will not require a security code when dialing.
10. See Program 69 for Verified Account Codes.
Il. Number of digits required when “0” is the first digit dialed; if this number of digits is not dialed, the system will disconnect
the call after 20 seconds. “0” is counted as a digit. Example: 0 + 1 + 714 + 583 - 3700 = 12 digits; 12 should be
programmed as a minimum in this case.
12. Default is IO seconds.
2-85
O--I
CREDI’