Strata DK 16 Manual

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
PROGRAM 37
RING TRANSFER (CAMP-ON) RECALL TIME
SELECT = Logical Port Number (00-19) 1 L HOLD T/ME = Ring Transfer Recall Time
Enter the number of the port that Enter the Ring Transfer Recall
needs a Ring Transfer Recall time Time (in seconds). The acceptable
assigned. See Note 3 for range is 011 - 999 seconds. Use
entering a range of ports. three digits.
NOTE: Shaded areas apply to DK16 only
L;$y’ 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Hold
Time
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data assigns a Ring Transfer Recall Time of 032 seconds to all ports.
3. To enter a range ofports, key in the sequence:
I I
Low portJ L High port
4. Ring Transfer Recall Time is the time it takes to recall a station that originates an unanswered or busy (camped-on)
transferred call.
5. Ring Transfermustbe allowed (Program 10-1, LED 07ON) for transferrecall to function; otherwise Recall willbe immediate.
6. Ring Transfer to stations in the Do Not Disturb Mode is not allowed; recall will be immediate if it is attempted-no matter what
the Program 37 recall time is.
2-73