Designing and Implementing a Junos Node Unifier Network

JNU 1.2 Design and Implementation Guide
26
host 169.37.0.2 {
security info;
change-log info;
/* All the syslog parameters are propagated to satellite */
/* except source-address. The source address used by */
/* the satellites are the mgmt address on satellite */
source-address 137.34.1.1;
}
file messages {
any any;
}
}
services {
ssh;
}
}
snmp {
/* community is configured by user, satellite community string is */
/* : */
community public {
authorization read-only;
}
community private {
authorization read-write;
}
trap-options {
source-address lo0;
}
trap-group public {
/* categories are configured by user, propagate to satellite */
categories {
authentication;
routing;
}
/* targets are configured by user, propagate to satellite */
targets {
169.37.0.1;
}
}
/* Need SNMP proxy configuration */
proxy jnu-sat1 {
device-name 192.168.0.2;
version-v2c {
snmp-community public:jnu-sat1;
}
routing-instance jnu-vrf;
}
proxy jnu-sat2 {
device-name 192.168.0.3;
version-v2c {
snmp-community public:jnu-sat2;
}
routing-instance jnu-vrf;
}
}
interfaces {
Copyright © 2013, Juniper Networks, Inc.