Designing and Implementing a Junos Node Unifier Network

More documents

Recommendations

Info

JNU 1.2 Design and Implementation Guide 82 Action From operational mode, enter the op jnu-show-satellites command. user@host>op jnu-show-satellites user@controller> op jnu-show-satellites Satellite-system State jnu-sat-ex1 Up jnu-sat-qfx2 Up Meaning The display shows that the two satellites are Up. Related Documentation • Junos Node Unifier Overview on page 4 • Installing the JNU Software on the Controller on page 21 • Installing the JNU Software on Satellite Devices on page 22 • Initializing JNU Mode on the Controller on page 22 • Running the Satellite Initialization Process on page 30 • Commit Process for Satellites Already Connected to the Controller on page 45 Copyright © 2013, Juniper Networks, Inc.
PART 4 Monitoring and Troubleshooting in the JNU Network Copyright © 2013, Juniper Networks, Inc. • Monitoring in the JNU Network on page 85 83
Page 1 and 2:
Junos ® OS Designing and Implement
Page 3 and 4:
Table of Contents Part 1 Introducti
Page 5 and 6:
PART 1 Introduction to Junos Node U
Page 7 and 8:
CHAPTER 1 Introduction to Junos Nod
Page 9 and 10:
Basic Architecture of a JNU Network
Page 11 and 12:
CHAPTER 2 Understanding the JNU Arc
Page 13 and 14:
The JNU management network is creat
Page 15 and 16:
Related Documentation Copyright ©
Page 17 and 18:
PART 2 Planning a JNU Implementatio
Page 19 and 20:
CHAPTER 3 Planning Overview • Pla
Page 21 and 22:
PART 3 Implementing JNU Copyright
Page 23 and 24:
CHAPTER 4 Best Practices for Config
Page 25 and 26:
CHAPTER 5 Getting Started with the
Page 27 and 28:
Copyright © 2013, Juniper Networks
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Related Documentation Copyright ©
Page 35 and 36: Table 2: JNU Satellite Initializati
Page 37 and 38: Copyright © 2013, Juniper Networks
Page 43 and 44: Related Documentation Copyright ©
Page 45 and 46: CHAPTER 6 Configuring Junos OS Feat
Page 47 and 48: Configuring Junos Features with JNU
Page 49 and 50: CHAPTER 7 Committing Configurations
Page 51 and 52: Returning to a Previously Committed
Page 53 and 54: CHAPTER 8 JNU Operational Mode Comm
Page 55 and 56: config-template-name Syntax op conf
Page 57 and 58: jnu-commit Syntax op jnu-commit Rel
Page 59 and 60: Table 3: jnu-initialize-controller
Page 61 and 62: Table 3: jnu-initialize-controller
Page 65 and 66: jnu-remote Syntax op jnu-remote com
Page 67 and 68: jnu-rollback Syntax op jnu-rollback
Page 69 and 70: jnu-show-satellites jnu-show-satell
Page 73 and 74: op Syntax op config-free-form devic
Page 75 and 76: CHAPTER 9 Setting Up a Basic JNU Im
Page 77 and 78: Table 5: Configuration Components U
Page 83 and 84: Step-by-Step Procedure routing-opti
Page 85: Verification Step-by-Step Procedure
Page 89 and 90: CHAPTER 10 Monitoring in the JNU Ne
Page 91 and 92: SNMP Get Process in the JNU Network
Page 93 and 94: System Logging in the JNU Network R
Page 95 and 96: Configuring the JNU Controller as a
show all

Designing and Implementing a Junos Node Unifier Network

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?