Designing and Implementing a Junos Node Unifier Network

More documents

Recommendations

Info

JNU 1.2 Design and Implementation Guide 86 Related Documentation This process means that all logging traffic originates from one source address on the controller. • Configuring the JNU Controller as an SNMP Proxy Agent on page 91 • SNMP Get Process in the JNU Network on page 87 • SNMP Trap Process in the JNU Network on page 88 • System Logging in the JNU Network on page 89 Copyright © 2013, Juniper Networks, Inc.
SNMP Get Process in the JNU Network Related Documentation Copyright © 2013, Juniper Networks, Inc. Figure 5 on page 87 shows the SNMP Get process in the JNU network. Figure 5: SNMP Get Process • 4 NMS (SNMP server, SNMP trap server) 5 1 Network interface 3 2 Satellites Management Plane Controller acts as SNMP Proxy 1— SNMP server sends a Get request message 4— The controller receives the Get reply and to the controller with the community string for a satellite. processes it as an SNMP client. 2— The controller, acting as SNMP proxy, 5— Acting as an SNMP server, the controller terminates the Get request from the SNMP server. It then acts as an SNMP client, and sends the request to the appropriate satellite. 3—The satellite sends a Get reply message to the controller. g041396 then sends the Get reply message to the SNMP server. Centralized Collection of SNMP Statistics and Log Messages Overview on page 85 • Configuring the JNU Controller as an SNMP Proxy Agent on page 91 • SNMP Trap Process in the JNU Network on page 88 Chapter 10: Monitoring in the JNU Network 87
Page 1 and 2:
Junos ® OS Designing and Implement
Page 3 and 4:
Table of Contents Part 1 Introducti
Page 5 and 6:
PART 1 Introduction to Junos Node U
Page 7 and 8:
CHAPTER 1 Introduction to Junos Nod
Page 9 and 10:
Basic Architecture of a JNU Network
Page 11 and 12:
CHAPTER 2 Understanding the JNU Arc
Page 13 and 14:
The JNU management network is creat
Page 15 and 16:
Related Documentation Copyright ©
Page 17 and 18:
PART 2 Planning a JNU Implementatio
Page 19 and 20:
CHAPTER 3 Planning Overview • Pla
Page 21 and 22:
PART 3 Implementing JNU Copyright
Page 23 and 24:
CHAPTER 4 Best Practices for Config
Page 25 and 26:
CHAPTER 5 Getting Started with the
Page 27 and 28:
Copyright © 2013, Juniper Networks
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Related Documentation Copyright ©
Page 35 and 36:
Table 2: JNU Satellite Initializati
Page 37 and 38:
Page 39 and 40: Copyright © 2013, Juniper Networks
Page 43 and 44: Related Documentation Copyright ©
Page 45 and 46: CHAPTER 6 Configuring Junos OS Feat
Page 47 and 48: Configuring Junos Features with JNU
Page 49 and 50: CHAPTER 7 Committing Configurations
Page 51 and 52: Returning to a Previously Committed
Page 53 and 54: CHAPTER 8 JNU Operational Mode Comm
Page 55 and 56: config-template-name Syntax op conf
Page 57 and 58: jnu-commit Syntax op jnu-commit Rel
Page 59 and 60: Table 3: jnu-initialize-controller
Page 61 and 62: Table 3: jnu-initialize-controller
Page 65 and 66: jnu-remote Syntax op jnu-remote com
Page 67 and 68: jnu-rollback Syntax op jnu-rollback
Page 69 and 70: jnu-show-satellites jnu-show-satell
Page 73 and 74: op Syntax op config-free-form devic
Page 75 and 76: CHAPTER 9 Setting Up a Basic JNU Im
Page 77 and 78: Table 5: Configuration Components U
Page 83 and 84: Step-by-Step Procedure routing-opti
Page 85 and 86: Verification Step-by-Step Procedure
Page 87 and 88: PART 4 Monitoring and Troubleshooti
Page 89: CHAPTER 10 Monitoring in the JNU Ne
Page 93 and 94: System Logging in the JNU Network R
Page 95 and 96: Configuring the JNU Controller as a
show all

Designing and Implementing a Junos Node Unifier Network

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?