Designing and Implementing a Junos Node Unifier Network

JNU 1.2 Design and Implementation Guide
To initialize a satellite device:
1. Enter the following command on the satellite device, and follow the prompts.
user@jnu-satellite1> op url /var/db/scripts/op/jnu-initialize-satellite.slax
Satellite initializations:
Please select the JNU mode:
1. Feature-rich mode
The controller and satellite features are supported. Configurations
are forwarded to the satellites when the target device is a
satellite managed by this controller.
2. Port Extender mode
Interfaces on the satellites are extended to the satellites.
Features are configured on the extended ports.
JNU mode (1/2)? 2
Please enter hostname [jnu-satellite1]: jnu1-sat-ex1
Please enter management IP address: 10.0.0.1
Please enter uplink IP prefix (192.168.0.2-254/24): 192.168.0.2/24
Please enter uplink interface name: ge-0/0/0
Do you want to use aggregated-ethernet for the uplink [n]: y
Please enter uplink aggregate name [ae31] 63
Please enter management VLAN id [4094]:
Please enter controller downlink IP address [192.168.0.1]:
Sample Initial Configuration for an EX Series Switch
32
The following is an example of the configuration that is configured and committed on
the satellite device during the initialize process.
groups {
jnu-satellite-mgmt {
chassis {
aggregated-devices {
ethernet-devices {
device-count 63;
}
}
}
system {
syslog {
/ * syslog parameters propagated from controller except source address */
host 169.37.0.1 {
security info;
change-log info;
source-address 10.0.0.1;
}
file messages {
any any;
}
}
ntp {
/ * Using controller mgmt IP address */
server 192.168.0.1;
}
services {
ssh;
Copyright © 2013, Juniper Networks, Inc.