Designing and Implementing a Junos Node Unifier Network

More documents

Recommendations

Info

JNU 1.2 Design and Implementation Guide jnu-show-satellites Syntax op jnu-show-satellites Release Information Command introduced in JNU 1.0. Description Display the state of each satellite to determine if the satellite is up and connected to the Required Privilege controller. You can also use this command to test and run the op script on the satellite devices. Options detail—(Optional) Tests and runs the op script on the satellite devices. Level view Output Fields Table 4 on page 64 lists the output fields for the jnu-show-satellites command. Output Table 4: jnu-show-satellites Output Fields 64 Field Name Satellite System State fields are listed in the approximate order in which they appear. Field Description Name of the satellite device Status of the satellite device. • Up—Satellite device is up and connected to the controller. • Down—Satellite device is not connected to the controller. Level of Output level-of-output none level-of-output none Copyright © 2013, Juniper Networks, Inc.
jnu-show-satellites jnu-show-satellites detail Copyright © 2013, Juniper Networks, Inc. user@jnu1-ctrlr> jnu-show-satellites Satellite-System State jnu1-sat-ex1 Up jnu1-sat-qfx2 Up Chapter 8: JNU Operational Mode Commands user@jnu1-ctrlr> jnu-show-satellites detail 2012-07-15 23:10:30 OMST: reading op script input details 2012-07-15 23:10:30 OMST: testing op details 2012-07-15 23:10:30 OMST: running op script 'jnu-show-satellites.slax' 2012-07-15 23:10:30 OMST: opening op script '/var/db/scripts/op/jnu-show-satellites.slax' 2012-07-15 23:10:30 OMST: reading op script 'jnu-show-satellites.slax' Satellite-System State jnu1-sat-ex1 Up jnu1-sat-qfx2 Up 2012-07-15 23:10:35 OMST: inspecting op output 'jnu-show-satellites.slax' 2012-07-15 23:10:35 OMST: finished op script 'jnu-show-satellites.slax' 65
Page 1 and 2:
Junos ® OS Designing and Implement
Page 3 and 4:
Table of Contents Part 1 Introducti
Page 5 and 6:
PART 1 Introduction to Junos Node U
Page 7 and 8:
CHAPTER 1 Introduction to Junos Nod
Page 9 and 10:
Basic Architecture of a JNU Network
Page 11 and 12:
CHAPTER 2 Understanding the JNU Arc
Page 13 and 14:
The JNU management network is creat
Page 15 and 16:
Related Documentation Copyright ©
Page 17 and 18: PART 2 Planning a JNU Implementatio
Page 19 and 20: CHAPTER 3 Planning Overview • Pla
Page 21 and 22: PART 3 Implementing JNU Copyright
Page 23 and 24: CHAPTER 4 Best Practices for Config
Page 25 and 26: CHAPTER 5 Getting Started with the
Page 27 and 28: Copyright © 2013, Juniper Networks
Page 33 and 34: Related Documentation Copyright ©
Page 35 and 36: Table 2: JNU Satellite Initializati
Page 43 and 44: Related Documentation Copyright ©
Page 45 and 46: CHAPTER 6 Configuring Junos OS Feat
Page 47 and 48: Configuring Junos Features with JNU
Page 49 and 50: CHAPTER 7 Committing Configurations
Page 51 and 52: Returning to a Previously Committed
Page 53 and 54: CHAPTER 8 JNU Operational Mode Comm
Page 55 and 56: config-template-name Syntax op conf
Page 57 and 58: jnu-commit Syntax op jnu-commit Rel
Page 59 and 60: Table 3: jnu-initialize-controller
Page 61 and 62: Table 3: jnu-initialize-controller
Page 65 and 66: jnu-remote Syntax op jnu-remote com
Page 67: jnu-rollback Syntax op jnu-rollback
Page 73 and 74: op Syntax op config-free-form devic
Page 75 and 76: CHAPTER 9 Setting Up a Basic JNU Im
Page 77 and 78: Table 5: Configuration Components U
Page 83 and 84: Step-by-Step Procedure routing-opti
Page 85 and 86: Verification Step-by-Step Procedure
Page 87 and 88: PART 4 Monitoring and Troubleshooti
Page 89 and 90: CHAPTER 10 Monitoring in the JNU Ne
Page 91 and 92: SNMP Get Process in the JNU Network
Page 93 and 94: System Logging in the JNU Network R
Page 95 and 96: Configuring the JNU Controller as a
show all

Designing and Implementing a Junos Node Unifier Network

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?