Designing and Implementing a Junos Node Unifier Network

JNU 1.2 Design and Implementation Guide
80
}
}
snmp {
/* Other snmp parameters propagated from controller */
community public.hyde {
read-only;
}
trap-options {
source-address 192.168.0.3;
}
trap-group eas {
version v2;
targets {
169.37.0.1;
}
}
}
interfaces {
ge-0/1/1 {
/* Using aggregate ethernet since there can be more than 1 uplink */
gigether-options {
802.3ad ae63;
}
}
ae63 {
/* Aggregated ethernet interface uplink connection to controller */
aggregated-ethernet-options {
lacp {
active;
}
}
vlan-tagging;
unit 16385 {
vlan-id 4094;
family inet {
address 192.168.0.3/24;
}
}
}
}
policy-options {
policy-statement jnu-management {
/* Routes that are to be leaked from jnu-vrf to main instance */
from {
route-filter 169.37.0.1/32 exact;
route-filter 132.0.1.1/32 exact;
protocol static;
}
then accept;
}
policy-statement reject-all {
then reject;
}
}
routing-options {
/* These configurations leak routes from jnu-vrf to main instance */
Copyright © 2013, Juniper Networks, Inc.