Designing and Implementing a Junos Node Unifier Network

op
Syntax op
config-free-form
device device-name
action (add | delete)
“set statement-name value”
config-free-form-precommit
config-template-name
device device-name
action (set | delete)
parameter-name parameter-value
jnu-add-delete-satellites
action set | delete
ae-id id-value
downlink interface-id
ieee-802.3ad disable
inet ip-address
sat-mgmt-ip ip-address
satellite satellite-name
jnu-commit
jnu-initialize-controller
jnu-order-satellites
insert device-name-1 (before | after ) device-name-2)
jnu-remote
command “operational-mode-command”
device device-name
jnu-rollback
number
jnu-show-satellites
jnu-show-configuration
device device-name
source candidate | committed
Description Run operational commands on the controller.
Options config-free-form-precommit —Do not run this command. It is an internal system command.
Related
Documentation
Copyright © 2013, Juniper Networks, Inc.
script —(Optional) Runs the specified op script in the /var/db/scripts/op directory.
url url—(Optional) Runs the op script specified in the URL.
The remaining commands are described separately.
Chapter 8: JNU Operational Mode Commands
• Using Operational Mode Commands with JNU Overview on page 49
69