Ergonomics - Atlas Copco
Ergonomics - Atlas Copco
Ergonomics - Atlas Copco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
32<br />
Grinders<br />
Grinders and sanders are essentially<br />
the same machines used with different<br />
inserted tools for different purposes.<br />
Power outputs can range from 0.1 to 4.5<br />
kW. Weights vary from a few tenths of a<br />
kilogram to several kilograms. High<br />
power is always a risk factor and opera-<br />
tors must be trained to use the tool safely.<br />
Where are they used?<br />
Grinding machines are used where material<br />
removal is the primary task – from cutting<br />
off pouring ingate, and heavy grinding on<br />
large components, to precision die grinding.<br />
Grinding machines are suitable for rough<br />
or fine sanding of castings. They can be<br />
used on huge constructions, such as offshore<br />
platforms, or for repairing the bodywork of<br />
damaged motor vehicles. Machines of this<br />
type will put a fine finish on a plastic boat<br />
or give wooden furniture a surface that<br />
makes it a pleasure to use.<br />
Before using high powered grinders, operators<br />
should be trained to avoid unnecessary risks of<br />
exposure to injury, noise and vibration.