SHARP TROUBLE & ERROR CODES AR-651, AR-810 - OlsonBros

[EC2] Inserter reverse path delay jam 1
[EC3] Inserter reverse path stop jam 1
[EC4] Inserter reverse path delay jam 2
[EC5] Inserter reverse path stop jam 2
Are the transport roller and reverse roller tainted?
NO
Clean up the rollers.
Is the harness between the inserter control board and reverse path sensor is open-circuited?
NO
Replace the harness.
Is the reverse path sensor working improperly?
NO
Replace the reverse path sensor.
Replace the inserter control board.
[EC6] Inserter transport delay jam 1
[EC7] Inserter transport stop jam 1
[EC8] Inserter transport delay jam 2
[EC9] Inserter transport stop jam 2
Is the transport roller tainted?
NO
Clean up the roller.
Is the harness between the inserter control board and transport sensor is open-circuited?
NO
YES
YES
Replace the harness.
Is the transport sensor working improperly?
NO
YES
YES
YES
YES
Replace the transport sensor.
Replace the inserter control board.
5 - 51 AR-651/810 TROUBLE SHOOTING