SHARP TROUBLE & ERROR CODES AR-651, AR-810 - OlsonBros
SHARP TROUBLE & ERROR CODES AR-651, AR-810 - OlsonBros
SHARP TROUBLE & ERROR CODES AR-651, AR-810 - OlsonBros
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
[C85] Lifting tray motor error<br />
Is the lifting tray lifted when originals are set on the feeding tray?<br />
YES<br />
Is the loading of the lifting tray normal?<br />
<strong>AR</strong>-<strong>651</strong>/<strong>810</strong> <strong>TROUBLE</strong> SHOOTING 5 - 74<br />
Adjust the mechanical loading. Remove, if any, extraneous<br />
materials.<br />
Is the power voltage for CN5-5 and CN6 on the ADF board 24V?<br />
1. Replace the ADF board.<br />
Replace the lifting tray motor.<br />
2. Perform the EEPROM initialization of RADF, sensor<br />
automatical adjustment and tray width sensor adjustment.<br />
Is the upper limit sensor working properly when the lifting tray is lifted?<br />
YES<br />
Replace the upper limit sensor.<br />
Is the lifting tray lowered when originals are removed from the original tray?<br />
YES<br />
NO<br />
NO<br />
NO<br />
YES<br />
YES<br />
YES<br />
1. Replace the lower limit sensor.<br />
2. Replace the ADF board.<br />
Is the loading of the lifting tray normal?<br />
Adjust the mechanical loading. Remove, if any, extraneous<br />
materials.<br />
3. Perform the EEPROM initialization of RADF, sensor automatical adjustment and tray width<br />
sensor adjustment.<br />
NO<br />
NO<br />
NO
![[10] TEST COMMAND, TROUBLE CODES - OlsonBros](https://img.yumpu.com/18824764/1/190x245/10-test-command-trouble-codes-olsonbros.jpg?quality=85)
Change language