SHARP TROUBLE & ERROR CODES AR-651, AR-810 - OlsonBros
SHARP TROUBLE & ERROR CODES AR-651, AR-810 - OlsonBros
SHARP TROUBLE & ERROR CODES AR-651, AR-810 - OlsonBros
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
[C86] Large original exit sensor adjustment error<br />
Is there any extraneous material between the large original exit sensor and reflective mirror?<br />
NO<br />
Is the reflective mirror tainted?<br />
NO<br />
Remove the extraneous material.<br />
Clean up the mirror.<br />
Is the conductor pattern around IC6, IC11 and CN11 on the ADF board short- or open-circuited?<br />
NO<br />
YES<br />
YES<br />
YES<br />
1. Replace the ADF board.<br />
2. Perform the EEPROM initialization of RADF, sensor automatical adjustment<br />
and tray width sensor adjustment.<br />
1. Replace the large original exit sensor.<br />
2. Perform the EEPROM initialization of RADF, sensor automatical adjustment and tray width<br />
sensor adjustment.<br />
5 - 75 <strong>AR</strong>-<strong>651</strong>/<strong>810</strong> <strong>TROUBLE</strong> SHOOTING