datasheet (3).pdf - EEWeb

dsPIC33FJ32MC302/304, dsPIC33FJ64MCX02/X04 AND dsPIC33FJ128MCX02/X04
TABLE 31-23: TIMER2 AND TIMER 4 EXTERNAL CLOCK TIMING REQUIREMENTS
AC CHARACTERISTICS
Param
No.
TB10 TtxH TxCK High
Time
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Symbol Characteristic (1) Min Typ Max Units Conditions
TB11 TtxL TxCK Low
Time
TB15 TtxP TxCK
Input
Period
Synchronous
mode
Synchronous
mode
Synchronous
mode
TB20 TCKEXTMRL Delay from External TxCK
Clock Edge to Timer Increment
Greater of:
20 or
(TCY + 20)/N
Greater of:
20 or
(TCY + 20)/N
Greater of:
40 or
(2 TCY + 40)/N
— — ns Must also meet
parameter TB15
N = prescale
value
(1, 8, 64, 256)
— — ns Must also meet
parameter TB15
N = prescale
value
(1, 8, 64, 256)
— — ns N = prescale
value
(1, 8, 64, 256)
0.75 TCY + 40 — 1.75 TCY + 40 ns
Note 1: These parameters are characterized, but are not tested in manufacturing.
TABLE 31-24: TIMER3 AND TIMER 4 EXTERNAL CLOCK TIMING REQUIREMENTS
AC CHARACTERISTICS
Param
No.
TC10 TtxH TxCK High
Time
TC11 TtxL TxCK Low
Time
TC15 TtxP TxCK Input
Period
Symbol Characteristic (1)
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Min Typ Max Units Conditions
Synchronous TCY + 20 — — ns Must also meet
parameter TC15
Synchronous TCY + 20 — — ns Must also meet
parameter TC15
Synchronous,
with prescaler
TC20 TCKEXTMRL Delay from External TxCK
Clock Edge to Timer Increment
2 TCY + 40 — — ns N = prescale
value
(1, 8, 64, 256)
0.75 TCY + 40 — 1.75 TCY + 40 ns
Note 1: These parameters are characterized, but are not tested in manufacturing.
© 2011 Microchip Technology Inc. DS70291E-page 361