INT1100 User Guide - Mitel Edocs

More documents

Recommendations

Info

General Information The phone complies with FCC Parts 15 and 68. Operating temperature: 0 ºC to +50 ºC (+32 ºF to +122 ºF) AC Adapter Information AC Adapter part number: AD-312 for the base AD-446 for the charger (TRU5860-2 only) Input Voltage: 120V AC 60Hz 120V AC 60Hz Output Voltage: 9V DC 350 mA 9V DC 210 mA Battery Information Battery part number: BT-446 Capacity: 800 mAh, 3.6V Battery use time (per charge) From fully charged Talk mode duration: Up to 4 hours Standby mode duration: Up to 8 days If the handset is left off of the base, the actual Talk mode duration will be reduced respective to the amount of time the handset is off the base. Recharge your phone on a regular basis by returning the handset to the base after each phone call. When the operating time becomes short, even after the battery is recharged, please replace the battery. With normal usage, the battery should last about one year. A replacement Inter-Tel adapter and battery may be purchase Inter-Tel accessories at your local Inter-Tel dealer or by contacting the Inter-Tel Parts Department (800) 554-3988. Hours are from 8:00 a.m. to 5:00 p.m. CST, Monday through Friday. We can also be reached on the web at www.inter-tel.com. Specifications, features, and availability of optional accessories are all subject to change without prior notice. [ 40 ] ADDITIONAL INFORMATION
Troubleshooting If your phone is not performing to your expectations, please try these simple steps first. Symptom Suggestion The status LED won’t illuminate when • Make sure the AC adapter is plugged into the base and wall outlet. the handset is placed in the base. • Make sure the handset is properly seated in the base. • Make sure the charging contacts on the handset and base are clean. The audio sounds weak • Move the handset and/or base to a different location away from metal objects and/or scratchy. or appliances and try again. • Press select/ch to help eliminate background noise. • Make sure that you are not too far from the base. Can’t make or receive calls. • Check both ends of the base telephone line cord. • Make sure the AC adapter is plugged into the base and wall outlet. • Disconnect the AC adapter for a few minutes, then reconnect it. • Change the digital security code (See page 43). • Make sure that you are not too far from the base. The handset doesn’t ring or receive • The battery pack may be weak. Charge the battery in the base unit a page. for 15-20 hours. • The handset may be too far away from the base unit. • Place the base unit away from appliances or metal objects. • Change the digital security code (See page 43). Severe noise interference. • Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances. • Move to another location or turn off the source of interference. The Caller ID does not display. • The handset was picked up before the second ring. • The call was placed through a switchboard. • Call your local telephone company to verify your Caller ID service is current. “Unavailable” message is displayed • Make sure the other handset is not already in use. Both handsets cannot be on the LCD screen of the handset. in talk mode at the same time. • Place the handset for at least 5 seconds to re-register to the main base. • Make sure the handset is not too far from the main base when trying to use. The handset doesn’t communicate • Change the digital security code (See page 43). with the other handset. • Make sure that you have registered the second handset (TXC580 only). The second handset can’t join • Only one handset at a time can talk with an outside caller. To allow a different the conversation. handset to talk to the caller, transfer the call to the other handset. If you still have a problem. • Contact your local authorized Inter-Tel reseller. . TROUBLESHOOTING TROUBLESHOOTING [ 41 ]
Page 1 and 2: Inter-Tel INT1100 User Guide
Page 3 and 4: Welcome Features Congratulations on
Page 5 and 6: Controls and Functions 1 2 3 4 5 6
Page 7 and 8: Read this First This cordless telep
Page 9 and 10: B. Install the battery pack Charge
Page 11 and 12: C. Connect the base unit 1) Connect
Page 13 and 14: Setting Caller ID Options There are
Page 15 and 16: Selecting a Language Language optio
Page 17 and 18: Redialing a Call The last three pho
Page 19 and 20: Distinctive Ringer Setup “Distinc
Page 21 and 22: Tone Dialing Switch-over Some telep
Page 23 and 24: Phonebook Phonebook allows you to d
Page 25 and 26: Steps for Entering Names and Specia
Page 27 and 28: Viewing the Phonebook Your phone st
Page 29 and 30: Editing or Erasing a Stored Name, P
Page 31 and 32: Chain Dialing The memory locations
Page 33 and 34: Viewing the Caller ID List The Call
Page 35 and 36: Using the Caller ID Message List Ca
Page 37 and 38: Changing the Digital Security Code
Page 39: Note on Power Sources Battery repla
Page 43 and 44: Precautions! Before you read anythi
Page 45 and 46: Index 0 - 9 10 ring options .......

INT1100 User Guide - Mitel Edocs

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?