NewTom VG User Manual rev 4.0 - Image Works

Safety and maintenance of the device
Maintenance agreement
The device should be periodically checked: please contact the manufacturer or distributor to discuss for a
maintenance contract.
System testing check list
The following check list specifies the suggested time spaces for the system controls. For further information
please contact Your local distributor.
Responsible Part Activity Frequency
User Global system QA phantom check Weekly
Radioprotection
expert (RPE) Global system Radiological routine In charge of the
RPE
Error Log Check 12 months
Every external part Damage check 12 months
Technical staff Emergency button Emergency test 12 months
Electrical functioning Check 12 months
Mechanical functioning Check 12 months
3.5 Cleaning and disinfection
This chapter gives general information about cleaning and disinfection of the device.
WARNING:
Power the device off before any cleaning.
Some cleaning or disinfecting products may damage Your health. Such products concentration in the air
should never exceed the local laws' limits. In this aim always follow the manufacturer instructions and be
sure that the room is well airy.
3.5.1 Chemical agents to avoid
• Do not use spray or solvent which may enter the device, causing damage electrical parts or forming
inflammable mixtures. This could put in danger the patient, the user and the environment.
• Do not use abrasive liquids such as acetone, gas oil or alcohol (exception: alcohol can be used for the
cleaning of the workstation display). These substances can deteriorate surfaces and materials that are
responsible for the device proper working.
• Do not use substances that may release ammonia due to dissociation or decomposition. Ammonia can
corrode.
• Do not use cleaning products containing silicone: it tends to accumulate and possibly damage electrical
contacts.
Rev. 1.0 - 02/15/2009 Page 17 of 72