NewTom VG User Manual rev 4.0 - Image Works

Safety and maintenance of the device
3.5.2 Cleaning
3.5.2.1 Scanner and control box
The device must be cleaned with a wet cloth and a soft solution. The cloth should be wet before applying it
on the scanner surface.
WARNING:
Do not apply cleaning solutions directly on the device surface.
3.5.2.2 Workstation and periphera ls
Follow the manufacturer's instructions for cleaning the workstation and its peripheral units. If these are
missing, please refer to the previous paragraph.
To clean the display use a wet cloth with alcohol or a solution made up of 1/3 to 2/3 distilled water and
alcohol.
NOTE:
For further information about safety and maintenance of the device please contact
your local distributor.
3.5.3 Disinfection
Despite the device do not require any disinfection, it is suggested to use standard disinfection product for the
cleansing of the head support.
3.5.4 Sterilization
No sterilization is required for the normal use of the device.
3.6 Transport and storage
During transport and storage the following conditions must be observed:
Transport and storage temperature:
Transport and storage humidity:
-20° to +70° (Ce lsius)
min 10%, max 85% not condensing.
Do not expose to acids, saltiness, rain.
Rev. 1.0 - 02/15/2009 Page 18 of 72