NewTom VG User Manual rev 4.0 - Image Works

More documents

Recommendations

Info

Getting started… 4.3 Overall view The system is made up of three main parts: scanner unit, control box and main workstation. It is also possible to add more workstations for data processing and storage. This subject is discussed in the "Software <strong>Manual</strong>". NOTE: The system may not be expanded with parts or accessories other than the ones described inside this manual. Rev. 1.0 - 02/15/2009 Page 21 of 72
Getting started… 4.4 Scanner unit 4.4.1 Controls placed on the scanner unit The scanner unit is the main part of the system, it performs the scan. Two control panels are placed on the columns side. They have the same appearance and function: the control of the positioning movements, the light display of the x-ray source emitting state and the control of the positioning laser beam. Hereafter a short description of each button and sign. X-ray light display: the LEDs turn on during the x-ray. Vertical movement enable button: it enables the functioning of the buttons for vertical movements. Vertical movement buttons (up/down): to move up or down the structure supporting the rotating arm, press one of them simultaneously with the corresponding enabling button. Rotation movement enable button: it enables the functioning of the buttons for rotating arm movements. Rotating arm movement buttons: to rotate the arm clockwise or anti-clockwise, press one of them simultaneously with the corresponding enabling button. Laser button (only for devices with positioning laser beam): press to turn the positioning laser beam on/off. The laser will stay light up for about 60 seconds Rev. 1.0 - 02/15/2009 Page 22 of 72
Page 1 and 2: VGi User Manual Rev. 1.0 - February
Page 3 and 4: MANUFACTURER’S NOTICE ABOUT MEDIC
Page 5 and 6: Index 6.1.1 Preparing the patient .
Page 7 and 8: Introduction to this manual 1.3 Sty
Page 9 and 10: About safety Local laws Carefully f
Page 11 and 12: About safety 2.4 Patient's and user
Page 13 and 14: About safety WARNING: If the x-ray
Page 15 and 16: Safety and maintenance of the devic
Page 21: Getting started… 4 Getting starte
Page 25 and 26: Getting started… 4.5 Control box
Page 27 and 28: Getting started… 4.6.1 Cables The
Page 29 and 30: Preliminary procedures 5 Preliminar
Page 31 and 32: Preliminary procedures From the NNT
Page 33 and 34: Scanning Relaxation Ask the patient
Page 35 and 36: Scanning Set the height of scanner
Page 37 and 38: Quality assurance 7 Quality assuran
Page 39 and 40: Quality assurance 7.2 Sample Images
Page 41 and 42: IEC61223: Acceptance Test 9 IEC6122
Page 43 and 44: IEC61223: Acceptance Test Dose Mode
Page 45 and 46: APPENDIX A: Technical Reference Sca
Page 47 and 48: APPENDIX A: Technical Reference Zoo
Page 49 and 50: APPENDIX A: Technical Reference Rev
Page 51 and 52: APPENDIX A: Technical Reference Rev
Page 53 and 54: APPENDIX A: Technical Reference X-r
Page 55 and 56: APPENDIX A: Technical Reference INP
Page 57 and 58: APPENDIX A: Technical Reference 16
Page 59 and 60: APPENDIX A: Technical Reference Ele
Page 61 and 62: APPENDIX A: Technical Reference Cla
Page 63 and 64: APPENDIX B: Standards conformity Al
Page 65 and 66: APPENDIX B: Standards conformity Th
Page 67 and 68: APPENDIX C: Labels PLATE ON THE NEW
Page 69 and 70: APPENDIX C: Labels LABELS ON THE X-
Page 71 and 72: APPENDIX C: Labels LABEL ON THE BRA
Page 73:
APPENDIX C: Labels HEAD SUPPORT LAB
show all

NewTom VG User Manual rev 4.0 - Image Works

Create successful ePaper yourself

Delete template?

Save as template?