MANUALE UTENTI

USER'S MANUAL
Data base
3.5 To Rename a Data Base
If you wish to change the name of your Data Base, you can do this by
following a few instructions:
1. Press "Rename DB" from the DataBase Selection window. The
"DataBase Renaming" window will open.
2. Choose a new name for your Data Base and insert it into the "New
name" field.
3. Insert the Password of the Data Base whose name you are changing.
4. Press "OK".
At this point the new name will appear in the Select a DB drop-down list
of the DataBase Selection window in place of the old name.
To close the DataBase Renaming window without giving a new name to
your Data Base press "Cancel".
NOTE:
Be sure your Data Base is closed before renaming it. In fact if you try to
rename an active Data Base, the system will deny the operation and will
visualise an error message.
If you want to rename the Data Base you are working on we advise you
to:
1. Close DMS.
2. Restart DMS, without opening any Data Base.
3. Select and rename the Data Base you want to change the name of.
DMS SOFTWARE Strato 2000 12
(Rev. 0)